mmoalt_followcommander [MMOMinion Wiki]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== mmoalt_FollowCommander ======
<WRAP left round important 60%>
WvW is not officially supported. Can probably work together with the madao wvw addon.

</WRAP>
<WRAP left round important 60%>
This addon is feature complete. And will probably not be updated again.
</WRAP>
\\
<WRAP left important 60%>
Please do exactly what it says in the **[[installation]]** guide.\\
This addon is more demanding then normal botmodes and will trigger errors faster then Grind ever would.
</WRAP>


{{ :mmoalt_followcommander_64.png?direct&300|}}
==== Follow any commander around the map! ====





Features:
  * Automatically selects the nearest commander as follow target
  * Supports making a party member a "Commander"
  * Supports making mentors a "Commander"
  * Optimized for following commanders. Loooot!
  * Leaves the commander if not enough people are following
  * Leaves if the commander is not doing anything
  * Leaves if the commander been off the mesh too long
  * Uses waypoints
  * Does Grindmode when no commander is found
  * Train-, Chesttrain- and Roamingmode
  * Enable/Disable combat
  * Enable/Disable gathering
  * Switches targets fast and prioritizes the commander target->champions
  * Combat aggressiveness to tweak how often the bot should change targets.
  * If enabled, logs spike damage and evades if the damage output is high enough
  * Stacks on commander if asked
  * Loots extra chests/bonus chests
  * Uses guild banners

===== How to use =====
  * Go to a map with a commander
  * Set your bot mode to "mmoalt_FollowCommander".
  * Click the big fat play button

===== Settings =====

==== Info ====
**Debug**: Show predicted location, current location and next location.\\
**DebugLog**: Show various debug output.\\
\\
There is also a ton of debug information in the "Status" window.
  * Click "Show status" in "Main menu"

==== Combat ====

Enable or disable combat\\


**Agressiveness**: \\
How fast do you want to change targets.\\
And how many people need to be in combat before the bot starts killing stuff.
  * Ultra
  * High
  * Optimal
  * Low
  * Lowest

<WRAP left tip 30%>
Higher values are more demanding.
Do not use Ultra on classes with slow auto attack!
</WRAP>

==== Gathering ====


Enable or disable gathering\\
**GatherRange**: Max distance from the commander to do gather task.

==== FollowType ====
**FollowType**:
  * Commander - Follows the nearest commander tag.
  * Party - Follow a partymember
  * Mentors - Follows the nearest mentor
**PartyMember**: Select the party member to follow.\\
**FollowMode**:
  * Train
    * Follow the commander and group at an optimal distance for tagging mobs
  * Chest
    * Follow the commander much closer. Mob targeting is less then for train mode
  * Roam
    * Follows the commander in a large circle.
  * DynamicRoam (BETA)
    * Switches between Roam and Train if the bot can see if the commander is doing an event.

==== Roaming ====
**MaxRoamDistance**: \\
Maximum distance from the commander the bot is allowed to go.

==== Player ====
**Damagelogger**: Enable logging of damage dealt to you by mobs. Enables advanced evading.\\
**HideInGroup**: When nothing is going on, the bot will select a random target near the commander and move there.\\
**WaypointMode**:
  * Accurate
    * Uses pathing to find the nearest waypoint.
    * More demanding
  * Simple
    * Uses 2D distance to find the nearest waypoint, might result in you porting to a waypoint far away in path distance.
    * Less demanding
  * None
    * Don't use waypoints (except when dead)
**NoCommanderMode**:\\
Choose what the bot should do when no commander is around\\
  * Grind
  * Gather
  * mmoalt_GatherMode (If you own it)

==== Commander ====
**MaxIdleTime**: Set the minimum time (in minutes) before this commander is considered not active.\\
**MinFollowers**: Set the minimum number of followers to make this a proper commander.\\
**AllowMentors**: Allow following mentors if there are no commanders on the map.\\
**Blacklist current commander**: Manually blacklist the current commander.

===== Recommended game/bot settings =====
**Game**:\\
Enable AoE Loot on interact\\
Enable Autoloot\\
Disable Double-Tap to Evade\\

**Bot**:\\
Disable Combat movement\\
Enable Deposit items\\
Set up a sell filter\\
Buy salvage kits\\
Set up a salvage filter\\

===== Disclaimers =====

<WRAP left important 60%>
==== Mesh ====
You still need a proper mesh for following.\\
Having a proper mesh is your responsibility.
\\
If you don't want the bot to follow the commander in certain areas, you need to remove that area from a mesh yourself!
</WRAP>
<WRAP clear></WRAP>

<WRAP left important 60%>
==== Following a human around is always dangerous. ====


I've added many failsafes in the addon, but due to human nature i can not always guarantee that a human will use bot logic.
Therefore I can not take any responsibility for you getting banned for either botting too long or the bot doing unusual stuff.
</WRAP>
<WRAP clear></WRAP>
\\
\\
Support:
[[http://www.mmominion.com/thread-13268.html|Forum thread]]


===== Public API =====
''FollowCommanderAPI = {}''

''FollowCommanderAPI.hasTarget = [boolean]'' \\
True if currently following, false otherwise.\\

''FollowCommanderAPI.targetID = [nil\number]'' \\
Character id of the player you are following.\\

''FollowCommanderAPI.settings = [table]'' \\
Current FollowCommander settings\\

''FollowCommanderAPI.dropDownSettings = [table]'' \\
Values from the drop down list in the gui.\\

''FollowCommanderAPI:Reload()''\\
Reload all settings, set new random seed values and restart the botmode.\\

''FollowCommanderAPI:ChangeSetting(key, value)''\\
Change a FollowCommander setting. Valid keys are in FollowCommanderAPI.settings. Value has to be the same type as the old value.\\
**Settings that have their own function can not be changed with this one.**\\

''FollowCommanderAPI:BlacklistCurrentCommander()''\\
Should be self explainatory.\\

''FollowCommanderAPI:SetFollowType(type)''\\
Valid types are in FollowCommanderAPI.dropDownSettings.FollowType.\\

''FollowCommanderAPI:SetFollowMode(mode)''\\
Valid modes are in FollowCommanderAPI.dropDownSettings.FollowMode.\\

''FollowCommanderAPI:SetPartyMember(member)''\\
Follow a new person when the FollowType is set to "PartyMember". Can be id or name. \\

''FollowCommanderAPI:SetCombatAggressiveness(aggressiveness)''\\
Valid types are in FollowCommanderAPI.dropDownSettings.CombatAggressiveness.\\

''FollowCommanderAPI:SetWayPointUsage(usage)''\\
Valid types are in FollowCommanderAPI.dropDownSettings.WayPointUsage.\\

''FollowCommanderAPI:SetNoCommanderMode(mode)''\\
Valid types are in FollowCommanderAPI.dropDownSettings.NoCommanderMode.\\

**All functions that affect settings will call FollowCommanderAPI:Reload() automatically.**
User Tools

Site Tools

Page Tools
