User Tools

Site Tools


teleportcommand

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
teleportcommand [2026/01/10 18:24] – [What it does] mistahmikeyteleportcommand [2026/11/14 13:27] (current) – Update release summary, shared controls, support and full-window screenshots mistahmikey
Line 1: Line 1:
-======= Teleport Command (TC) =======+====== Teleport Command (TC) ======
 {{:mistahmikey:teleportcommand:teleportcommand.png?400|}} {{:mistahmikey:teleportcommand:teleportcommand.png?400|}}
  
-===== What it does ===== +===== Release Summary ===== 
 + 
 +**TeleportCommand 2.0.0** 
 + 
 +  * Provides macro-friendly travel commands for maps, positions, worlds, housing plots, and Taximan favorites. 
 +  * Coordinates travel through MML, including housing transitions and the final destination position. Text Command Helper sequences can wait for arrival with wait=true and a timeout. 
 +  * Requires MML 6.0.0. Taximan is needed for favorites; other supported destinations do not require it. 
 + 
 +===== What it does =====
  
 Teleport Command (TC) provides a FFXIV macro command that will transport your character to chosen places all over Eorzea, even if they are on different worlds: Teleport Command (TC) provides a FFXIV macro command that will transport your character to chosen places all over Eorzea, even if they are on different worlds:
Line 10: Line 18:
   * If you own Taximan, allows you travel to your favorite places.   * If you own Taximan, allows you travel to your favorite places.
  
-TC only uses the in-game teleport functions your character uses - no teleport hacks are employed, so you can use TC with confidence.+TC uses normal in-game travel, including teleports, area transitions, and movement along supported navigation routes.
  
 ===== Requirements ===== ===== Requirements =====
  
-You must also download MistahMikeysLib from the store. It's free, of course.+Install the free MistahMikeysLib addon from the store. TeleportCommand 2.0.0 requires MistahMikeysLib 6.0.0; update both together. 
 + 
 +Taximan is required only for its saved favorites. Other destinations do not require Taximan. Text Command Helper (TCH) is optional; install and enable the updated TCH if you want an alias sequence to wait for arrival. Ordinary chat commands and FFXIV macros can use TC without TCH.
  
 TC supports the following languages:  EN, FR, JP, KR, CN, and TC. TC supports the following languages:  EN, FR, JP, KR, CN, and TC.
Line 35: Line 45:
 TC can move your character to almost limitless places, but it cannot go to every possible location in the game.  First and foremost, it is limited by the Minion Mesh system - if the location you wish to travel to is on a mesh, then TC has a good chance of getting to it. If it's not on the mesh, then TC cannot move to it - however, you can use the Minion mesh editing tool (the Navigation menu item on the Minion main menu) to fix such mesh deficiencies, and you can submit those fixes through me to have them incorporated into the Minion baseline.  Second, TC is able to get to any location that can be directly accessed after traveling to an aetheryte, aethernet, or city gate.  Locations that are behind secondary gates (like when you must talk to an NPC or open a door) or zone lines are likely not accessible - but - I have provided access to a handful of useful ones, and I do have the ability to add access to positions behind secondary gates and zone lines as people identify a burning need for them. TC can move your character to almost limitless places, but it cannot go to every possible location in the game.  First and foremost, it is limited by the Minion Mesh system - if the location you wish to travel to is on a mesh, then TC has a good chance of getting to it. If it's not on the mesh, then TC cannot move to it - however, you can use the Minion mesh editing tool (the Navigation menu item on the Minion main menu) to fix such mesh deficiencies, and you can submit those fixes through me to have them incorporated into the Minion baseline.  Second, TC is able to get to any location that can be directly accessed after traveling to an aetheryte, aethernet, or city gate.  Locations that are behind secondary gates (like when you must talk to an NPC or open a door) or zone lines are likely not accessible - but - I have provided access to a handful of useful ones, and I do have the ability to add access to positions behind secondary gates and zone lines as people identify a burning need for them.
  
-======= Command Description =======+====== Command Description ======
  
-You must use the FFXIV echo command to submit a teleport command for execution, via a macro or typing the the chat window, like so:+You must use the FFXIV echo command to submit a teleport command for execution, via a macro or typing in the chat window, like so:
  
 /e /teleport <arg1>,<arg2>,...,<argn> /e /teleport <arg1>,<arg2>,...,<argn>
  
-Each arg has the format <key>=<value>. White space is generally not significant EXCEPT when you specify values for which TC must search, like map names, world names, housing area names or Taximan favorite descriptions.+Separate arguments with commas. Most use ''key=value''; ''flag'' has no value. Preserve the spaces and punctuation within area names, world names, housing-area names, favorite descriptions, and category names.
  
  
-The teleport command arguments are defined in the following table.  All arguments are **case insensitive**.+The command keys and destination names are case-insensitive. The boolean values for ''wait'' must be written exactly as ''true'' or ''false''.
  
-| Key          | Value                       | Function                                                                                                                                                                                                                                                                                                                                                                                  | +^ Key ^ Value ^ Function ^ 
-| worldid      | world number or world name  | Used to specify the world to which you'd like to travel.  If not provided, the current world is used.                                                                                                                                                                                                                                                                                   | +| worldid | World number or world name | Select the destination world. Without this argument, a favorite uses its saved world; other destinations use the current world. Game travel restrictions still apply. | 
-| mapid        | map number or map name      | Used to specify the map to which you'd like to travel. If not provided, the current map is used. If you use a map name, there are cases where multiple mapids can correspond to a single map name.  When that occurs, TC will select the first mapid it finds that has an aetheryte associated with it, and failing that, it will select the first mapid it finds that has an intermediary associated with it.  Failing both, you can't get there.                                                                                                                                                                                                                                                                                         | +| mapid | Territory number or area name | Select the destination territory. This is the numeric Mapid shown on TC's Main tab, not an Area Map texture or floor/layer identifier. If omitted, the current territory is used, except that an explicit destination is required when currently in a housing area. Names must match the localized in-game area name. If multiple territories share a name, TC prefers one with an aetheryte, then one with a supported intermediary; use the numeric ID to remove ambiguity. | 
-| pos          | world position              | Used to specify the 3D real world position (NOT a map position that you see when using the mini map or area map): <xpos> <ypos> <zpos>. Each <pos> must be a floating point number. The current real world position of your character is shown on TC's main tab as My Position. If not provided, travel will cease after teleporting to the desired world/map                                                                                                                                                                                                                                        | +| pos | World X Y Z | Select a world position, with three numbers separated by spaces. World Y is height. These are not the X/Y coordinates printed on the in-game map. Copy the world position from My Position on Main. If omitted, TC uses the selected territory's normal arrival destination unless a favorite, housing plot, or flag provides a position. | 
-| housingarea  | housing area name           | Used to specify the housing area when you want to travel to a placard. Valid values are: mist,the lavender beds,the goblet,shirogane,empyreum. Spaces are significant here, but case is not.                                                                                                                                                                                              | +| housingarea | Housing-area name | Select a housing area for plot travel. Supply ''wardno'' and ''plotno'' as well. Use the name for your game language; English names are Mist, The Lavender Beds, The Goblet, Shirogane, and Empyreum. | 
-| wardno       | ward number                 | Used to specify the ward number in the housing area when you want to travel to a placard. Valid values are 1-24 or 30, depending on your FFXIV version.                                                                                                                                                                                                                                   | +| wardno | Whole ward number | Select a ward in the chosen housing area. Must be within the ward range supported by MML for your game version. | 
-| plotno       | plot number                 | Used to specify the plot number in the housing area when you want to travel to a placard. Valid values are 1-60.                                                                                                                                                                                                                                                                          | +| plotno | Whole plot number, 1–60 | Select the destination plot placard. Main-division and subdivision plots are handled through the housing route. | 
-| favorite     | favorite description        | This command is only enabled if you currently own Taximan.  Used to specify a favorite you have saved in Taximan to which you want to travel. The 'favorite description' you enter must match one you have entered into Taximan's favorites table. Spaces are significant here, but case is not.  You can override the world saved in the favorite by specifying the 'worldid' argument.  | +| favorite | Saved favorite description | Requires Taximan ownership and an existing saved favorite. Matches its description without regard to case. Uses the favorite's saved world unless ''worldid'' overrides it. | 
-| flag | <none> | Used to travel to the currently set flag. | +| favoritecat | Saved category name | Select the category containing ''favorite''. Defaults to ''Default'' when omitted. Requires ''favorite'' and Taximan ownership. | 
 +| flag | No value | Travel to the currently set map flag. A flag must exist. TC estimates reachable ground height and includes the final positioning in the trip; a 2D flag cannot identify which of several overlapping floors you intended. | 
 +| wait | true or false | In a TCH alias sequence, ''wait=true'' waits for this exact trip to finish successfully before continuing. Omitted or ''wait=false'' lets TCH continue immediately after dispatch. This does not block ordinary FFXIV macro execution. | 
 +| timeout | Positive finite milliseconds | Limit the entire trip, including intermediary routes, area transitions, and final positioning. ''timeout=120000'' allows 120 seconds. If omitted, no overall time limit is imposed. It works with or without ''wait=true''. |
  
-Any errors in command entry will result in a red message being displayed in the chat window. A green message will appear when the travel successfully completes. Note:  Teleport Command and Taximan share their current 'travel in progress' state, so if you try to start travel using one while the other is currently in the middle of traveling, you will get a error message indicating travel is already in progress.+Command-entry errors appear in red in chat. A green completion message means the requested trip succeeded, including the final position when one was specified. A teleport to an aetheryte alone does not complete a request that still needs a housing entrance or final walk. 
 + 
 +Choose one destination form: a territory/position, housing plot, saved favorite, or map flag. Avoid mixing these forms. A favorite takes precedence over a conflicting position or flag; otherwise a flag takes precedence over a conflicting territory/position. An invalid argument is still rejected before destination selection.
  
 Travel initiated by TC is affected by the settings on the Movement Tab, described below. Travel initiated by TC is affected by the settings on the Movement Tab, described below.
Line 77: Line 92:
  
  
-======= UI =======+===== Travel Coordination, Cancellation, and Reloads ===== 
 +MML manages one active trip across all participating addons. A new request while another trip is active is rejected; it is not queued and does not interrupt the current owner. This includes another request from TC itself. Wait for the existing trip to finish, or cancel it through the addon that started it, before retrying. 
 + 
 +Resetting TC cancels its own active travel and resets its settings. It does not cancel travel owned by another addon. An already-issued teleport or area transition may still finish after cancellation; MML prevents a new trip from starting while that cancelled transport is still settling. 
 + 
 +During a normal Lua reload or unload, MML cancels owned travel and waits for its movement and transport to settle before allowing the reload or unload to complete. The next load starts without an active trip; previous travel and TCH command sequences are not resumed. Saved profiles and Taximan favorites are retained. 
 + 
 +This coordination does not control unrelated addons that issue their own movement. Avoid running conflicting movement automation, such as another dungeon runner, at the same time. 
 + 
 +===== Command Examples ===== 
 +Enter these in chat, or place them on ordinary FFXIV macro lines. Each line is an independent example: 
 + 
 +<code text> 
 +/e /teleport mapid=130 
 +/e /teleport mapid=134,timeout=120000 
 +/e /teleport flag,timeout=120000 
 +/e /teleport housingarea=Mist,wardno=1,plotno=31 
 +/e /teleport favorite=Zircon,favoritecat=Default 
 +</code> 
 + 
 +The first example requests Ul'dah - Steps of Nald. The second requests Middle La Noscea with a two-minute limit. The housing example requests the placard at Mist, ward 1, plot 31 in the subdivision. The favorite example requires you to save a Taximan favorite named Zircon in the Default category first. Adjust destination names for your game language where applicable. Do not run several independent travel examples together: competing trips are rejected. 
 + 
 +===== Waiting for Arrival with Text Command Helper ===== 
 +For completion-aware sequences, use MML 6.0.0, TeleportCommand 2.0.0, and Text Command Helper 2.0.0 together. Enable TC and TCH. Taximan is needed only for examples using its saved favorites. 
 + 
 +In TCH, create an alias named ''visit_zircon'' whose command is: 
 + 
 +<code text> 
 +/e /teleport favorite=Zircon,favoritecat=Default,wait=true,timeout=120000 
 +</code> 
 + 
 +Create another alias named ''arrived'' whose command is: 
 + 
 +<code text> 
 +/e <lime Arrived at Zircon!> 
 +</code> 
 + 
 +Then run: 
 + 
 +<code text> 
 +/e /exec visit_zircon,arrived 
 +</code> 
 + 
 +TCH waits for that exact trip to arrive successfully before running ''arrived''. A busy rejection, invalid destination, travel failure, cancellation, or timeout stops the remaining sequence. Resetting TCH cancels its unfinished waited trip. TCH does not infer arrival from the command's text or from another addon's trip finishing. 
 + 
 +To add a fixed 1.25-second pause after successful arrival, run: 
 + 
 +<code text> 
 +/e /exec visit_zircon,wait=1250,arrived 
 +</code> 
 + 
 +''wait=true'' on ''/teleport'' means wait for arrival. ''wait=1250'' in ''/exec'' means a fixed delay in milliseconds. These are separate features. 
 + 
 +The same arrival-wait options work without a favorite. For example, use either of these as the command of a TCH travel alias: 
 + 
 +<code text> 
 +/e /teleport flag,wait=true,timeout=120000 
 +/e /teleport housingarea=Mist,wardno=1,plotno=31,wait=true,timeout=120000 
 +</code> 
 + 
 +Follow that alias with a separate success-message alias in ''/exec''. Set a map flag before using the flag example. 
 + 
 +If TeleportCommand is missing or disabled, the updated TCH reports the problem and stops the sequence even when ''wait'' is omitted or false. With TC available, commands without ''wait=true'' continue immediately; later travel failure does not retroactively stop those commands. An ordinary FFXIV macro does not gain a blocking wait by adding ''wait=true''; the arrival wait is provided by TCH's sequence runner. 
 + 
 +====== UI ====== 
 + 
 +The descriptions reflect the current release. Some screenshots show earlier layouts or English labels; the text describes the current controls.
  
 You start TC via the FFXIVMinion menu drop down. It's under the "MistahMikey" menu item.  Clicking "TeleportCommand" should pop up its UI window.  The UI consists of different input areas called tabs that are selected by clicking the tab name that appears on the first line of the UI.  Each tab is described below. You start TC via the FFXIVMinion menu drop down. It's under the "MistahMikey" menu item.  Clicking "TeleportCommand" should pop up its UI window.  The UI consists of different input areas called tabs that are selected by clicking the tab name that appears on the first line of the UI.  Each tab is described below.
Line 92: Line 173:
  
 | Enabled* | When checked, enables you to travel to specified locations by issue a macro command.| | Enabled* | When checked, enables you to travel to specified locations by issue a macro command.|
-| Reset | Resets all settings to their default initial values. You can use this to abort certain operations you've started if you can catch it in time. If you have a current profile set, and Load Current Profile After Reset (Profile Tab) is enabled, then your saved profile values will be loaded.  The Reset button will disappear while the reset is in progress, and will reappear when it completes. |+| Reset | Cancels TC's own active trip and resets its settings to their initial values. Travel owned by another addon is not cancelled. If Load Current Profile After Reset is enabled, the current profile is then loaded. The Reset button is hidden while reset is in progress. |
 | Discord Icon | Takes you to the TC Discord channel if you need support.  Be advised I am in the Eastern Time zone (UTC-05:00). | | Discord Icon | Takes you to the TC Discord channel if you need support.  Be advised I am in the Eastern Time zone (UTC-05:00). |
 | My Position | Shows you the current real world position of your character as <mapid> <xpos> <ypos> <zpos>.  You can copy/paste these for use with TC's "mapid" and "pos" command arguments. | | My Position | Shows you the current real world position of your character as <mapid> <xpos> <ypos> <zpos>.  You can copy/paste these for use with TC's "mapid" and "pos" command arguments. |
  
 ===== Movement Tab ===== ===== Movement Tab =====
-{{:mistahmikey:taximan:movement_tab.png?400|}}+{{:mistahmikey:teleportcommand:movement_tab.png?400|}}
  
-The Movement Tab allows you to control what kind of movement speed will be used to move your character within the zones TC visits.  There are two types of movement speed enhancements that are used:  running speed actions and mounts. Running speed actions include Sprint, and if you use the right character, Peloton and Fists of Wind.  These are invoked as they are available when the distance you must move is fairly short as indicated by the Mount Cutoff Distance.  When the distance is longer than the Mount Cutoff Distance, a selected or random mount will be used to travel that distance.  The controls on this tab are:+The Movement Tab allows you to control what kind of movement speed will be used to move your character within the zones TC visits.  There are two types of movement speed enhancements that are used:  running speed actions and mounts. Running speed actions include Sprint and, where available for your job, Peloton.  These are invoked as they are available when the distance you must move is fairly short as indicated by the Mount Cutoff Distance.  When the distance is longer than the Mount Cutoff Distance, a selected or random mount will be used to travel that distance.  The controls on this tab are: 
 + 
 +| Enable Speed Actions | When checked, TC will attempt to use speed actions (Sprint or Peloton) whenever they are available and it is appropriate. The mount will take priority if the cutoff distance requirement is met. | 
 +| Speed Action Cutoff Distance (yalms) | The distance above which TC will use Speed Actions to move your character. | 
 +| Enable Mount | When checked, TC will attempt to use a mount whenever one is available and it is appropriate. | 
 +| Mount Cutoff Distance (yalms) | The distance above which TC will use a mount to move your character. | 
 +| Mount Selection | A list of mounts from which you can chose one to use whenever a mount is needed to travel to the destination. Be aware that this list, due to limitations in Minion, contains more mounts than you really own. If you pick one it turns out you cannot use (because you don't own it or you are in a zone where mounts aren't allowed), a popup will appear informing you of the situation. | 
 +| Select Random Mount | When checked, TC will randomly pick an available mount that you own to travel to the destination. This overrides your Mount Selection. |
  
-| Enable Speed Actions* | When checked, TC will attempt to use speed actions (Sprint, Peloton, Fists of Wind) whenever they are available and it is appropriate. The mount will take priority if the cutoff distance requirement is met. | 
-| Speed Action Cutoff Distance (yalms)* | The distance above which TC will use Speed Actions to move your character. | 
-| Enable Mount* | When checked, TC will attempt to use a mount whenever one is available and it is appropriate. | 
-| Mount Cutoff Distance (yalms)* | The distance above which TC will use a mount to move your character. | 
-| Mount Selection* | A list of mounts from which you can chose one to use whenever a mount is needed to run that long distance to the placard. Be aware that this list, due to limitations in Minion, contains more mounts than you really own. If you pick one it turns out you cannot use (because you don't own it or you are in a zone where mounts aren't allowed), a popup will appear informing you of the situation. | 
-| Select Random Mount* | When checked, TC will randomly pick an available mount that you own to run to the placard. This overrides your Mount Selection. | 
 ===== Profile Tab ===== ===== Profile Tab =====
-{{:mistahmikey:taximan:profile_tab.png?400|}}+{{:mistahmikey:teleportcommand:profile_tab.png?400|}}
  
-The Profile Tab allows you to persistently store most of TC's settings. The profile settings are stored in files unique to the character and game language used to create the profile. You can create as many profiles as you like. The controls on this tab are:+The Display Language choice on Debug is saved with this addon's profile. Save the profile after changing it; loading that profile restores the choice. Profiles and the current-profile selection are separated by game region, not by the display language.
  
-| Load Current Profile After Reset* | When checked, if you hit Reset on the Main Tab, or when TC is loaded when you start Minion, after all settings are initialized to their default values, the saved settings in your current profile are loaded. | +The Profile Tab allows you to persistently store most of TC's settings. The profile settings are stored in files unique to the character and game region used to create the profile. You can create as many profiles as you like. The controls on this tab are: 
-| Current Profile Name* | The settings file you selected to be the current profile being used by TC. |+ 
 +| Load Current Profile After Reset | When checked, if you hit Reset on the Main Tab, or when TC is loaded when you start Minion, after all settings are initialized to their default values, the saved settings in your current profile are loaded. | 
 +| Current Profile Name | The settings file you selected to be the current profile being used by TC. |
 | Load | Load all settings from the current profile. | | Load | Load all settings from the current profile. |
 | Save | Save all settings to the current profile. | | Save | Save all settings to the current profile. |
Line 119: Line 203:
 | Add | Create the new profile and save all current settings to it. | | Add | Create the new profile and save all current settings to it. |
  
-The table is a list of all the profiles you have created for the current character and game language.  Using the "Selection" column, you can select specific profiles for the operations Delete or Make Current.  Obviously, only one profile at a time can be made current, so you can only select one for that operation, but you can select as many as you like for the Delete operation.  You can select/deselect all profiles by using the checkbox in the operation row.  ** Be aware that profile values are only saved when you explicitly request them to be saved via the Save button. ** +The table is a list of all the profiles you have created for the current character and game region.  Using the "Selection" column, you can select specific profiles for the operations Delete or Make Current.  Obviously, only one profile at a time can be made current, so you can only select one for that operation, but you can select as many as you like for the Delete operation.  You can select/deselect all profiles by using the checkbox in the operation row.  ** Be aware that profile values are only saved when you explicitly request them to be saved via the Save button. **
  
 ===== Debug Tab ===== ===== Debug Tab =====
 +{{:mistahmikey:teleportcommand:debug_tab.png?400|}}
  
-{{:mistahmikey:taximan:debug_tab.png?400|}}+This tab is primarily intended for use in conjunction with consultation with support.  It enables various test scenarios and debugging information that are used to help diagnose issues that might occur during operation.  The controls on this tab are:
  
-This tab is primarily intended for use in conjunction with consultation with TC support.  It enables various test scenarios and debugging information that are used to help diagnose issues that might occur during Squatter's operation.  The controls on this tab are:+Changing Display Language refreshes presentation without resetting active work. It does not change game text, interaction matching, command destination names, or region-based profile selection. Some screenshots show earlier controls or English labels.
  
-| Enable Log file* | When checked, TC will create a unique log file for your session. This only needs to be checked if you are told to do so by Squatter support. | +| Display Language | Choose Automatic (Game Language), English, French, Japanese, Chinese (Simplified), Korean, or Chinese (Traditional). This affects this addon's interface. Missing UI translations use English. | 
-| Enable Timestamp* | When checked, TC will include the current tick count in the debug messages. This provides information that facilitates debugging timing issues. | +| Enable Log File | When checked, a unique log file will be created for your session. This only needs to be checked if you are told to do so by support. | 
-| Debug Message Level Settings* | TC's debug message system implements a simple filtering mechanism that can be used to allow or inhibit certain message classes, generally in increasing order of verbosity.  The default settings are fairly "quiet", but to debug issues you encounter you will be asked to enable more verbose settings to gather diagnostic information. |+| Enable Timestamp | When checked, the current tick count will be included in the debug messages. This provides information that facilitates debugging timing issues. | 
 +| Debug Message Level Settings | The debug message system implements a simple filtering mechanism that can be used to allow or inhibit certain message classes, generally in increasing order of verbosity. When checked, the corresponding message class is enabled. | 
 +| Enable Async Logging | When checked, log output for periodic writing is buffered. | 
 +| Log Flush Interval (ms) | Shown when async logging is enabled; sets the buffer flush interval in milliseconds. | 
 +| Cleanup Log Files | When clicked, runs the library's log-file cleanup; progress is shown while cleanup runs. |
  
-====== Support ======+Additional tracing and diagnostic panels may appear when authorized by the library. Use these with support guidance.
  
 +====== Support ======
 For bug support, please post a message on discord: https://discord.gg/zw5bDY3J9C.  I will respond as soon as I am able, generally within 24 hours at most. For bug support, please post a message on discord: https://discord.gg/zw5bDY3J9C.  I will respond as soon as I am able, generally within 24 hours at most.
  
Line 139: Line 228:
  
   - Enable the debug information category on the Debug Tab and do what you did to create the problem.  Then take a screen shot of your Minion Console Log when the problem occurs. Make sure the Log's window as big as possible to show the maximum amount of output.  If the output is larger than the window, then scroll the offscreen portions into view and send multiple screen shots.   - Enable the debug information category on the Debug Tab and do what you did to create the problem.  Then take a screen shot of your Minion Console Log when the problem occurs. Make sure the Log's window as big as possible to show the maximum amount of output.  If the output is larger than the window, then scroll the offscreen portions into view and send multiple screen shots.
-  - A screen shot of your Material Girl main tab+  - A screenshot of TC's Main tab and the exact command that produced the problem
  
 If you post this information to the specified channel (NOT RECOMMENDED), **please ensure it does not contain any information that identifies your account, character, or server.**  For complete anonymity, just DM it to mistahmikey#4073. If you post this information to the specified channel (NOT RECOMMENDED), **please ensure it does not contain any information that identifies your account, character, or server.**  For complete anonymity, just DM it to mistahmikey#4073.
 Additionally, **you should not use an account you use for in-game communications so you can't be doxed as a botter. ** Additionally, **you should not use an account you use for in-game communications so you can't be doxed as a botter. **
  
-If that initial information is insufficient for me to determine the cause, I will ask you to set other debug settings that will provide more information. TC is a complex piece of software, and can be negatively affected by a number of factors over which I have no control, not the least of which is what other addons you run. I appreciate your patience in working with me to solve your issue when it is not slam-dunk easy. As long as you are willing to try the debugging measures I request, I will work with you until your problem is solved.+If that initial information is insufficient for me to determine the cause, I will ask you to set other debug settings that will provide more information. This is a complex piece of software that can be negatively affected by a number of factors over which I have no control, including the other addons you run. I appreciate your patience in working with me to solve your issue when it is not slam-dunk easy. As long as you are willing to try the debugging measures I request, I will work with you until your problem is solved. 
teleportcommand.txt · Last modified: 2026/11/14 13:27 by mistahmikey

Page Tools