User Tools

Site Tools



ffxiv-tutorials

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
ffxiv-tutorials [2015/07/28 23:26] – [Atma] cichardffxiv-tutorials [2021/04/12 02:32] (current) anyone
Line 1: Line 1:
-===== Bot Modes ===== +==== Minion Core Functions ==== 
-==== Grind ==== +  * Always run the Game in windowed mode and not in full-screen.  
-MAKE SURE TO NOT HAVE LEGACY CONTROLS ENABLED!!!+{{https://puu.sh/we6j3/280be54a6b.jpg?200|}}
  
-1. First thing you are gonna want to do is set the bot mode to Grind\\ 
-{{http://i.imgur.com/R95MJ4G.png?200}}\\ 
-2. Once you have set the Bot Mode to Grind you will need to select the navmesh for the zone you are in. Open hte Mesh Manager by clicking Advanced Settings\\ 
-{{http://i.imgur.com/nxcj9OF.png?200}}\\ 
-3. Once you select the Navmesh for the zone you are in(or area you want to grind at) confirm the mesh loaded correctly by clicking "Show NavMesh"\\ 
-{{http://i.imgur.com/DJGBo1F.png?200}}\\ 
-4. Once you confirmed you are on the correct NavMesh you will need to place Markers for each area in the zone that you want to grind at. You can set these based on level ranges or by time. Locate the Marker Manager by clicking on Advanced Settings.\\ 
-5. You want to set the Marker Mode to List if you are going to run multiple markers for different level ranges or times. Set the marker mode to single if you are going to stay at one marker only.   
-Set the marker Type to Grind Marker then Click New Marker.\\ 
-{{http://i.imgur.com/IlTgD3q.png?200}}\\ 
-6. Once you click new marker you can edit the marker for your desired effect. Here I'veset the first marker level range 36-40 It will Grind at this marker till it dings 41 at which point it will move on to the next marker that is 41-45\\ 
-{{http://i.imgur.com/MMFIh5X.png?200}}\\ 
-7. Once you have your marker manager set up with the list of markers you want to use for grinding you need to select a skill profile for the class you are running.The Skill Manager is located under Advanced Settings. If its the default profile you want to run when this class is loaded tick that box and tick the enabled box.\\ 
-{{http://i.imgur.com/0rA461z.png?200}}\\ 
-8. After you have selected your Skill manager profile for the class you are running all thats left is to enable the bot by pressing the start/stop button.\\ 
-{{http://i.imgur.com/hW1GyN3.png?200}}\\ 
  
-=== Fates === +===== IMPORTANT SETTINGS =====  
-In addition to grinding at Grind Markers you can also have the bot Do Fates inbetween killing mobs.\\ +{{::ffxivconfig.jpg?200|}} 
-1. To enable Fate grinding locate the "Settings" options on the main bot window.\\ +  * **SET ALL GRAPHICS TO LOW** 
-{{http://i.imgur.com/hW1GyN3.png?200}}\\ +  * FFXIV uses a lot of memory and has bad memorymanagement itself, in order to prevent crashes, set your graphics to the lowest level possible. 
-2. Expand this option window and put tick in "Do Fates"\\ +  * MAKE SURE TO CHECK THE "**use low-detail models**AND THE "**cache lod data**" option!! This saves lot of memory
-{{http://i.imgur.com/z4xZHGw.png?200}}\\ +\\
-3. Furthermore if you want the bot to ignore all grind markers you can put tick in Fates Only.\\ +
-{{http://i.imgur.com/INatg01.png?200}}\\+
  
-{{youtube>YB34BvgqeRU?medium}} 
-=== Atma === 
-If you happen to be on the Atma quest chain you can enable Do Atma and the bot will change zones after you loot the Atma quest reward from your current zone(lvl 50 characters only) 
  
-==Grind Settings== +===== Grind Mode =====  
-Grind Options:\\ +{{youtube>182d8WIcDPQ?medium }}{{ https://puu.sh/wczWk/5a266bf98c.jpg|}} 
-{{http://i.imgur.com/lFowtlw.png?200}}\\ +Set the bot mode to Grind Mode \\ 
-1. Prioritize Claims: works with Content ID from  your grind markers. When Enableing Prioritize Claims the bot will try and gather all mobs within the Claim Range that match the content ID you put on the grind marker. +If you want to do Fates please select "Do Fates" \\ 
-Claim Range sets how far the bot will look for Mobs when you enable Prioritize Claims. +Furthermore if you want the bot to ignore all grind markers you can put a tick in Fates Only. \\ 
-Attack Claimed will attack mobs that are claimed by other people/groups.\\ +\\ 
-2. Combat Range% is for ranged classes. This setting is % value of your max range. so if your max range is 25yalm setting this setting to 90% will have you try to attack the mob when you are about 20 yalms away.\\ +---- 
- +** Tweaks**  
-FATE  Options:\\ +{{ https://puu.sh/wcA3u/3dd650e3c6.jpg?200|}}   
-{{http://i.imgur.com/bq0kjCF.png?200}}\\ +Here you can choose which fate types you wish to do, or what % of completion each specific fate is at before attempting to join it. 
-1. Rest in fates will enable you to rest when the HP/MP% value is reached after combat while doing fates.\\ +\\
-2. MaxFatelvl:+ is how many levels above your current level you want to do fates. For example if you are level 20 and set it to +5 it will do fates up to level 25.\\ +
-3. MinFatelLvl- is how many levels below your current level you want to do fates. For example if you are level 20 and you set it to -5 it will do fates as low as lvl 15.\\ +
-4. WaitForcomplete% the bot will run to the edge of the fate and wait for what ever value you place in this box. For example 5%, the bot will wait till 5% of the fate is completed before joining.\\ +
-5. Teleport % If the fate reaches a certain completed % the bot will simply telepot straight into the fate instead of running to it. Teleport must be on and no players within 30y of you.\\ +
-6. Wait Near EvacIf this is enabled you will wait near your Evac point.\\ +
-7. Min/Max Random Delay, The amount of time when a fate spawns your bot will wait before taking off to the fateI.E. if you set it to 5/10 it will wait a random amount of time between 5seconds and 10 seconds to head to the fate.\\ +
- +
-DETAILS:\\ +
-Here you can choose which fate types you wish to do, or what % of completion each specific fate is at before attempting to join it.\\ +
-{{http://i.imgur.com/Gu0x0bn.png?200}}\\ +
- +
-==== Party Grind ====+
  
 +----
 +** Markers: ** 
 +{{ https://puu.sh/wcADa/a1aefd2215.jpg?200|}}{{ https://puu.sh/wcA8y/224b1acda8.jpg?200|}}
 +If you want to set a specific Evac or Grind point set up a Marker in the Marker Manager. \\
 +(This is found in the Main Menu) \\
 +\\
 +Once you Create a new marker, you can edit the marker for your desired effect.\\
 +Here I've set the first marker level range 36-40 It will Grind at this marker till it levels to 41, then it will move on to the next marker that is 41-45\\
 +\\
 +-----
 +===== Party Grind Mode =====
 +{{ http://i.imgur.com/jc9RtuM.png?200}}{{ http://i.imgur.com/rj62xCB.png?200}}
 To set up Party Grind you need to set the Bot Mode to Party-grind.\\ To set up Party Grind you need to set the Bot Mode to Party-grind.\\
- +\\
-{{http://i.imgur.com/jc9RtuM.png?200}} +
 Party Grind is for Grinding open world and requires a Navmesh to work. A typical set up would consist of a leader bot on Grind, or a player playing manually. Then other bots in party.\\ Party Grind is for Grinding open world and requires a Navmesh to work. A typical set up would consist of a leader bot on Grind, or a player playing manually. Then other bots in party.\\
- +\\ 
-{{http://i.imgur.com/rj62xCB.png?200}}\\ +By using "Use Party Leader" and all grouped up the bots set to party grind will follow the leader around attack what the leader attacks.\\
- +
-By using "Use Party Leader" and all groupped up the bots set to party grind will follow the leader around attack what the leader attacks.\\+
  
 Another set up for party grind would be boosting a lower level character with a higher level character. To do this the Higher level character would have to be out of party. So you would set the higher level character to party grind remove the tick in "Use Party Leader" then Target the character you want to follow and hit Target->Leader.  This will cause the higher level bot to follow the lower level character around and kill what it kills.\\ Another set up for party grind would be boosting a lower level character with a higher level character. To do this the Higher level character would have to be out of party. So you would set the higher level character to party grind remove the tick in "Use Party Leader" then Target the character you want to follow and hit Target->Leader.  This will cause the higher level bot to follow the lower level character around and kill what it kills.\\
  
 {{http://i.imgur.com/GwVsOPr.png?200}} {{http://i.imgur.com/GwVsOPr.png?200}}
 +\\
 +----
 +===== Fishing ======
 +{{ https://puu.sh/wcBS0/70923d542f.jpg|}}{{ https://puu.sh/wcB3j/abf71517c2.jpg?200|}}
 +Set the bot mode to Fish Mode 
  
-==== Fish ==== +If you want to use Experience Manuals then select "Use Exp Manuals" \\ 
- +If you want to use Cordials then select "Use Cordials" 
-Fishing is very simple to set upFirst Set the Bot Mode to Fish.\\ +\\ 
- +---- 
-{{http://i.imgur.com/Qduhylb.png?200}}\\ +** Collectables: **  
- +{{ https://puu.sh/wcB7I/6c0aa2d0c5.jpg?200|}} \\ 
-Next click Marker Manager(if you have any questions about settings here you should read the marker mananger tutorial)\\ +Here you can setup collectables and there ratings. \\ 
- +Use Known Defaults will Populate the Field with Known Ratings. \\ 
-{{http://i.imgur.com/RIkRSqb.png?200}}\\ +\\ 
- +---- 
- +** Markers: **  
-Select the Marker you wish to edit or Create a new marker.\\ +{{ https://puu.sh/wcAP2/8e5529f2ba.jpg?200|}}{{ https://puu.sh/wcA8y/224b1acda8.jpg?200|}} 
- +If you want to set a specific Fishing Location via the Marker Manager. \\ 
-{{http://i.imgur.com/xwYoUpI.png?200}}\\ +(This is found in the Main Menu) \\ 
 +\\ 
 +Once you Create a new marker, you can edit the marker for your desired effect.  
 +\\ 
 +**Marker Settings:** \\ 
 +Name: You can Change the Name of the marker.\\ 
 +Fish Time: You can adjust the duration the bot will stay at this marker.\\ 
 +Player level Min: Sets What level it will start using this marker.\\ 
 +Player level Max: Sets what level it will stop using this marker.\\ 
 +Bate Name: The name of the bait you want to use at this marker\\ 
 +Use Mooch: Enables the use of Mooch.\\ 
 +Use Patience I: Enables the use of Patience I.\\ 
 +Use Patience II: Enables the use of Patience II.\\ 
 +Use Fish Eyes: Enables the use of Fish Eyes.\\ 
 +Use Chum: Enables the use of Chum.\\ 
 +Use Stealth: Enables the use of stealth at this marker.\\ 
 +Dangerous: Much more careful about Mob Aggro.\\ 
 +\\ 
 +Once you have all your markers set and configured enable the bot and begin fishing. 
 +\\ 
 +----- 
 +===== Gathering ===== 
 +{{youtube>kde6bsMxlYY?medium }}{{ https://puu.sh/wcBQC/60e3ed590c.jpg|}}{{ https://puu.sh/wcCdr/8179bcf367.jpg?200|}} 
 +Set the bot mode to Gather Mode \\ 
 +\\ 
 +If you want to use Experience Manuals then select "Use Exp Manuals". \\ 
 +\\ 
 +If you want to use Cordials then select "Use Cordials". \\ 
 +\\ 
 +---- 
 +** Collectables: **  
 +{{ https://puu.sh/wcChr/d1da05308d.jpg?200|}}{{ https://puu.sh/wcA8y/224b1acda8.jpg?200|}} 
 +Here you can setup collectables and there ratings.\\ 
 +\\ 
 +---- 
 +** Markers: **  
 +{{ https://puu.sh/wcCJr/4675eff057.jpg?200|}} 
 +If you want to set a specific Gathering Location via the Marker Manager. \\ 
 +(This is found in the Main Menu) \\ 
 +\\ 
 +Once you Create a new marker, you can edit the marker for your desired effect. \\ 
 +Single marker will allow only one Marker to be listed.\\ 
 +Marker List will allow more than 1 Marker to be Listed and can be setup as a Marker Team.\\ 
 +(See Video Below)\\ 
 +\\
 **Marker Settings:** **Marker Settings:**
  
-  - Name: You can Change the Name of the marker. +Name: You can Change the Name of the marker.\\ 
-  - TimeYou can adjust the duration the bot will stay at this marker. +Player level MinSets What level it will start using this marker.\\ 
-  Min Level: Sets What level it will start using this marker. +Player level Max: Sets what level it will stop using this marker.\\ 
-  Max Level: Sets what level it will stop using this marker. +Gather Time: Fixed time to farm this Marker.\\ 
-  - Bate NameThe name of the bait you want to use at this marker +Node Search Timeout: Used for Marker Team.\\ 
-  Use Mooch: Enables the use of Mooch+Node level Min: Sets What level it will start using this marker.\\ 
-  - Use StealthEnables the use of stealth at this marker.+Node level Max: Sets what level it will stop using this marker.\\ 
 +Skill ProfileSelects Skill Profile for this Marker.\\ 
 +\\ 
 +Use Cordials: Enables the use of Cordials for this Marker.\\ 
 +Gardening ItemsGathers items such as Seeds or Soils\\ 
 +Chocobo Food: Gathers items classed as Chocobo food.\\ 
 +Rare Items: Gathers items classed as Rare Items.\\ 
 +SpecialRare Items: Gathers items classed as Special Rare Items.\\
  
-Once you have all your markers set and configured enable the bot and begin fishing. +Dangerous: Much more careful about Mob Aggro.\\ 
-==== Gather ==== +\\ 
-1. First thing you need to do is set your "Bot Mode" to "Gather"\\ +Once you have all your markers set and configured enable the bot and begin Gathering.\\ 
-{{http://i.imgur.com/Blg05c5.png?200}}\\ +\\ 
-2. Next we need to set a Skill profile for your Gathering Class\\ +**NOTE YOU CAN USE PROFILES FROM THE PROFILE DROPDOWN AS WELL TO DO NORMAL GATHERING SUCH AS LEVELING PROFILES!!!!**
-{{http://i.imgur.com/yqKIbIt.png?200}} +
-3. The NavMesh for the zone you are in should be loaded\\ +
-{{http://i.imgur.com/GbKtzN7.png?200}}\\ +
-4. Next you want to look at your Marker Manager(click Advanced Settings)\\ +
-{{http://i.imgur.com/goZBgRO.png?200}}\\ +
-5. Click on Marker Manager\\ +
-{{http://i.imgur.com/cago37R.png?200}}\\ +
-//If you want to gather several markers set marker mode to list or random, if you want to gather from 1 Marker Set it to single.(Refer to the Marker Manager tutorial)//\\ +
-6. Make sure your Marker Type is set to the type of gathering you are doing.\\ +
-7. Then you need to edit your Marker with the Time/level range and items you want to gather from the nodes at this marker.\\ +
-{{http://i.imgur.com/REQv72o.png?200}}\\ +
-8. Make sure to set your Home location to the zone you are gathering in.\\  +
-9. Once you have done that you are ready to start the bot.\\ +
-{{http://i.imgur.com/XC9KiDO.png?200}}\\ +
- +
-{{youtube>PqZue-pHfdw?medium}} +
-=== Unspoiled === +
-To start gathering unspoiled, some setup is required. +
- +
-  First, **Options**\\ +
-{{http://i.imgur.com/3nyf7IY.png?200}}\\ +
- +
-**To gather unspoiled nodes, you must have:**\\ +
- +
-    -"Gather Unspoiled" on. +
-    -"Use Cordials" (only effective for unspoiled nodes right now) - optional.  The bot will use a cordial if the required GP set by the marker is more than 50 greater than your current GP upon reaching the node.  Other                considerations may be later added. +
-    -"Start Location" - a proper starting location must be selected before starting the bot, one that is current up right now, or will within a game hour or 2 is most effective. +
-    -"Miner Gearset" - the in-game # associated with your mining gearset. If this number is wrong, the bot will be unable to change classes. +
-    -"Botanist Gearset" - the in-game # associated with your botany gearset.  If this number is wrong, the bot will be unable to change classes. +
- +
-   * Second, **Markers:**\\ +
-{{http://i.imgur.com/5NgVYXW.png?200}}\\ +
-    -Placement: +
-       -Markers should be placed in an area where the node will be displayable on the minimap when it spawns (not as an arrow pointing somewhere else). +
-       -Any markers placed outside of minimap radius are too far away and are likely to not be picked up by the scan. +
-     -New options and settings have been added to a new marker type - Unspoiled Markers. +
-        -Minimum GP - sets the minimum GP requirement before the node interaction will begin, to ensure proper skill profile usage. +
-        -Gather Gardening - allows gardening items to be gathered +
-        -Gather Maps - select the type of map gathering to do +
-        -Skill Profile - sets the skill profile to be used for specifically for this marker +
-        -Marker Time and Levels have no bearing on unspoiled gathering. +
-{{http://i.imgur.com/JU7kiWd.png?200}}\\ +
- +
-  * Third, Locations: +
-{{http://i.imgur.com/292UQjW.png?200}} +
- +
-     -Once you have your markers, you can build  your location.  Most of the fields are self-explanatory. Locations must be managed while your character is on the map you will be using for the location. There are many reasons for this, and they cannot be avoided, so just do it. +
-        -Location Name  - some friendly name you'll recognize +
-        -Hour - the hour that the node actually spawns (0-23), where 0 is 12AM, 23 is 11 PM, etc. +
-        -Class - which class is required for the node type at this location +
-        -Refresh Map - use this button to refresh the list of available markers on this map.  +
-        -Marker Name - the marker which indicates the waiting area for this node. +
-        -Is Idle - You should have at least one "Idle" location where the bot can go in between locations.  I personally used Limsa.  You should never have more than one idle location, as this is not supported and may cause issues. +
- +
-{{http://i.imgur.com/gzNNcJc.png?200}} +
- +
-//Locations can be edited once saved, and should also be saved while on the map for that particular location.// +
- +
-Enabled - if you want to save this location, but not use it in the active rotation, uncheck this. +
- +
-**SPECIAL NOTES:** +
-      -FOR GARDENING ITEMS, YOU CAN **NOT** PUT THEM IN THE ITEM SLOTS.  **__YOU MUST__** USE THE "GATHER GARDENING" OPTION ON THE MARKER, AND THE SKILL PROFILE MUST USE TOIL TO UNCOVER THE ITEM. +
-      -If your timing is off, it is most likely your OS clock.  You can verify what time it is by checking the "Eorzea Time" in the Advanced Settings window, under "Bot Status" tab. +
-      -The bot is supposed to go to the nodes an hour early. +
-      -You need to use the "Refresh Map" option to refresh some of the dropdowns if locations are added, or if you change maps and need to pull up the list of markers, etc. +
- +
-{{youtube>6snW773NC-g?medium}} +
-==== Crafting ====+
  
 +===== Crafting ===== 
 +\\
 +\\
 Set your Bot Mode to Crafting Set your Bot Mode to Crafting
- +\\ 
-{{http://i.imgur.com/CsPOLww.png?200}} +\\ 
 +{{http://i.imgur.com/KvHKlPQ.png?200}} 
 +\\ 
 +\\
 Set the skill profile to the correct class and task that you are gonna be crafting for. Set the skill profile to the correct class and task that you are gonna be crafting for.
 +\\
 **Other Settings:** **Other Settings:**
  
   - Craft Amount: How many Crafts you want to do before it stops.   - Craft Amount: How many Crafts you want to do before it stops.
-  - Minimum CP: Checks for a minimum cp. If you are doing a craft that requires you have 380 CP and you run out of food buff and drop below that 380 cp the bot will stop crafting.+  - Minimum CP: Checks for a minimum CP. If you are doing a craft that requires you have 380 CP and you run out of food buff and drop below that 380 CP the bot will stop crafting. 
 + 
 +Then manually select the Recipe you wish to craft then enable the bot. 
 + 
 +{{youtube>g30rmYR_Lm4?medium}} 
 +\\ 
 +\\ 
 +**Crafting Orders** 
 +\\ 
 +\\ 
 +CLick Add Craft Orders and View Craft Orders.\\ 
 +\\ 
 +\\ 
 +{{http://i.imgur.com/ek2m6n2.png?200}} 
 +\\ 
 +\\ 
 +From the Drop down Menu select the Class you are crafting for. 
 +\\ 
 +\\ 
 +{{http://i.imgur.com/UdhmuZz.png?200}} 
 +\\ 
 +\\ 
 +Once you have the Class select open up the teir the recipie is in that you wish to craft. All the recipies for that teir will be visable clicking on a recipie will be up an "Inspect Recipie" window. in which you can see all the Materials needed to craft the recipie, durablity, and progress. Then you can click the add to order button. Repeat this process till you have all the items you wish to craft. 
 +\\ 
 +\\ 
 +{{http://i.imgur.com/xHia9M8.png?200}} 
 +\\ 
 +\\ 
 +Once you have all the Recipies added to the Craft Orders you can then set up the requirements for each one of theses crafts by clicking the recipie in the order. 
 +\\ 
 +\\ 
 +{{http://i.imgur.com/HDZMPph.png?200}}
  
-Then manually select the recipie you wish to craft then enable the bot.+**Craft Order Edit** 
 +  * Amount: Left at 0 will craft till you run out of mats required for this item, if you want to craft 5 times set this to 5. 
 +  * Count HQ only: this means if you want to craft 5 of these items but you want them to be 5 HQ it will only count towards the amount if the result is HQ. 
 +  * Count HQ: This will count HQ and NQ towards the "amount" value. 
 +  * Use Quick Synth: if you want to just use quick synth instead of a skill profile. 
 +  * Use HQ mats: Will allow the bot to use HQ mats in the recipie 
 +  * Skill Profile: you can select a specific skill profile to use for this Recipie.
  
-{{youtube>zlhvj6x-GvY?medium}} 
-==== Questing ==== 
  
 +{{youtube>k4HSxNngdp0?medium}}
 +===== Quest Mode =====
 +{{ https://puu.sh/whAyQ/c78c8b993d.jpg?200}} \\
 + \\
 This Tutorial is going over "How to set up Quest Mode" not how to build quest profiles. This Tutorial is going over "How to set up Quest Mode" not how to build quest profiles.
  
Line 191: Line 197:
  
 First thing you want to do is set the "Bot Mode:" to Quest.\\ First thing you want to do is set the "Bot Mode:" to Quest.\\
-{{http://i.imgur.com/jYd7qtV.png?200}}\\ 
  
 +
 +Select a Skill Profile if you want a different one.\\
 +{{https://puu.sh/whAzP/05616c1d26.jpg?200}} \\
 +\\
 Next you want to choose the profile you wish to run.\\ Next you want to choose the profile you wish to run.\\
-{{http://i.imgur.com/qHV44Tc.png?200}}\\ +{{https://puu.sh/whAEd/d248ab9244.jpg?200}} \\ 
- +\\
-Then you want to select the Skill Profile for the class you are running.\\ +
-{{http://i.imgur.com/iDXnWMf.png?200}}\\ +
- +
-Then you can Enable Bot. Its really that simple!!!!!\\+
  
-**Advanced Options:**\\ 
  
-{{http://i.imgur.com/kOmbHVN.png?200}}\\+Enable the Bot. \\ 
 +\\ 
 +** Its that simple. **
  
-You can enable some of the hacks here if you wish to auto repair or Disable Rendering. But if you use the Teleport hack use at your own risk. TPing in open world is dangerous and you could get reported.\\ 
-==== Duty ==== 
  
-This guide is going to go over "How to set up Duty Mode". This is not a tutoiral on how to create duty profiles.+===== Duty Mode =====  
 +\\ **  WARNING DUTY MODE USES TELEHACK ** 
 +\\ 
 +This guide is going to go over "How to set up Duty Mode". This is not a tutorial on how to create duty profiles.
  
-**YOU MUST HAVE 4 BOTS TO GROUP UP IN ORDER TO USE DUTY MODE.  YOU CANNOT SOLO QUEUETHE  BOT HANDLES ALL THE QUEUEING AND REQUEUEING.**+**YOU MUST HAVE 4 BOTS TO GROUP UP IN ORDER TO USE DUTY MODE.   
 +\\ TO SOLO QUEUE YOU MUST SET TO UNDERSIZED PARTY' 
 +\\ THE  BOT HANDLES ALL THE QUEUING AND RE-QUEUING .**
  
-Setup:+** Setup: ** \\
  
 To get started the first thing you need to do is set all 4 bots "Bot Mode:" to Duty\\ To get started the first thing you need to do is set all 4 bots "Bot Mode:" to Duty\\
Line 229: Line 238:
  
 {{http://i.imgur.com/qUdxiMw.png?200}}\\ {{http://i.imgur.com/qUdxiMw.png?200}}\\
- 
-Finally set your reset timer(This is for if for some reason you fail to requeue for the duty it will try to queue again by the value in Seconds you set here.)\\ 
-{{http://i.imgur.com/epikzS4.png?200}}\\ 
  
 A new feature has been added called Performance. You can set at how fast the bot selects the queue for the duty and and goes through the menus.\\ A new feature has been added called Performance. You can set at how fast the bot selects the queue for the duty and and goes through the menus.\\
Line 239: Line 245:
  
 Once all this is set up and your 4 bots are grouped up you can enable the bots enjoy Duty mode! Once all this is set up and your 4 bots are grouped up you can enable the bots enjoy Duty mode!
-==== PvP ==== +\\ 
 +\\ 
 +===== PvP =====  
 +\\ 
 +\\
 Set your Bot Mode to PVP.\\ Set your Bot Mode to PVP.\\
  
Line 259: Line 268:
  
 {{http://i.imgur.com/DJLSyBO.png?200}}\\ {{http://i.imgur.com/DJLSyBO.png?200}}\\
-==== Hunt ==== +\\ 
-==== Assist ====+\\
  
 +===== Assist ===== 
 +\\
 +\\
 Assist mode is for assissted play. You still control how your character moves, the bot does the rotation for you. Assist mode is for assissted play. You still control how your character moves, the bot does the rotation for you.
  
Line 281: Line 293:
   - Auto_confirm duty: this will auto confirm you in to duty when the commence window pops up.   - Auto_confirm duty: this will auto confirm you in to duty when the commence window pops up.
   - Quest Helper: will auto turn in quest items and complete the quest.( you must target the NPC to turn in reward to)   - Quest Helper: will auto turn in quest items and complete the quest.( you must target the NPC to turn in reward to)
-==== Quick Start ==== 
  
-Quick Start is exactly that, Quick and easy way to get started using the bot with minimal set up.+\\ 
 +\\
  
-Set your Bot Mode To Quick Start.\\ 
  
-{{http://i.imgur.com/YgGt6lk.png?200}}\\ +===== Skill Manager =====  
- +\\ 
-**Attack Settings:**\\ +\\
-{{http://i.imgur.com/hpOfcLb.png?200}}\\ +
-  - Min Level: The starting level at which you want to start attacking mobs at. +
-  - Max Level: The ending level at which you want to end attacking mobs at. +
-  - COntent ID: The Content ID of the mob you want to farm.( No marker needed) +
- +
-**Fish Settings:**\\ +
-{{http://i.imgur.com/9u0mEgu.png?200}}\\ +
-  - Use Mooch: Enables Mooch for where ever you are fishing +
-  - Manually Set the bait for the area you are in.(Be aware the bot will not move from this spot) +
- +
-**Gather Settings:**\\ +
-{{http://i.imgur.com/ae48ZSZ.png?200}}\\ +
-  - Min Level: Lowest level you want to start gathering at. +
-  - Item Priority1&2: The names spelled exactly as they show up in the list of the items you wish to gather. If prioirty 1 is missing from the list then it will gather priority 2. if both are missing it will gather the first item. +
-  - Content ID: The ID of the type of node you wish to gather from. +
-=====Managers===== +
-==== Skill ====+
 First you will need to navigate to the Skill Manager it is located under Advanced Settings.\\ First you will need to navigate to the Skill Manager it is located under Advanced Settings.\\
 {{http://i.imgur.com/YRJ0SrO.png?200}}\\ {{http://i.imgur.com/YRJ0SrO.png?200}}\\
Line 328: Line 322:
 {{http://i.imgur.com/GgF35QU.png?200}}\\ {{http://i.imgur.com/GgF35QU.png?200}}\\
  
-**Skill Details:**\\+** Skill Details: ** \\
  
   - **Name:** Name of the skill   - **Name:** Name of the skill
Line 336: Line 330:
   - **Enabled:** If the skill is enabled or disabled.   - **Enabled:** If the skill is enabled or disabled.
  
-**Basic Details**\\+** Basic Details** \\
  
   - **Charge Skill:** Is this a Gap Closwer skill(i.e. Shoulder Tackle)   - **Charge Skill:** Is this a Gap Closwer skill(i.e. Shoulder Tackle)
Line 353: Line 347:
   - **Sec Since Last Cast:** use on a timer based on seconds   - **Sec Since Last Cast:** use on a timer based on seconds
  
-**Other Skill Checks**+** Other Skill Checks **
  
   - **Skill ID:** Skill ID for the skill you wish to check Cooldown on   - **Skill ID:** Skill ID for the skill you wish to check Cooldown on
Line 363: Line 357:
  
 {{Http://i.imgur.com/bKiRZ9X.png?200}}\\ {{Http://i.imgur.com/bKiRZ9X.png?200}}\\
-==== Marker ====+\\ 
 +\\ 
 +** Crafting Skill Checks **\\ 
 +{{http://i.imgur.com/00v1TdF.png}}\\
  
-Click on Marker Manager.\\ +  * **Step<:** If the step count is less than this number it will use the skill 
-{{http://i.imgur.com/KlhGpO2.png?200}}\\+  * **Step>:** If the step count is more than this number it will use the skill 
 +  * **CP**: uses the skill based on the amount of CP
 +  * **Durability:** uses the skill based on durablility 
 +  * **Progress:** uses the skill based on Progress 
 +  * **Quality:** uses the skill based on Quality 
 +  * **ToT:** USes skill based on how many times you used Tricks of Trade 
 +  * **Hasty Touch success:** uses skill based on how many hasty touch successes 
 +  * **Inner quiet stacks**  uses skill based on innerQuiet stacks 
 +  * **Condition:** uses skill based on condtion, select condition from drop down menu 
 +  * ** Has buff:** uses skill if buff is present 
 +  * ** Missing buff:** uses skill if buff is missing
  
-Afer clicking on MarkerManager a new menu will pop up.\\ 
  
-{{http://i.imgur.com/FnoaeyT.png?200}}\\ 
  
-You have 3 different Marker Modes. When clicking on the marker mode drop down menu you get these options.\\ +===== Blacklist =====  
- +\\ 
-  - **Marker List:** Will go through the list of markers in order either by Time or Level. +\\
-  - **Single Marker:** Will Stay at the single marker.(Which is the marker in the Marker name Dropdown menu) +
-  - **Random Marker:** Will go through the list of markers in a random order based on time. +
- +
-{{http://i.imgur.com/vOreC4p.png?200}}\\ +
- +
-You have 4 different Marker types you select the marker from the drop down menu.\\ +
- +
-  - **Mining Marker:** When the bot is in Gather Mode you use this marker to set where you would like to mine. Controlled by time or level +
-  - **Botany Marker:** When the bot is in Gather Mode you use this marker to set where you would like to Harvest. Controlled by time or level  +
-  - **Grind Marker:** When the bot is in Grind Mode you use this marker to set where you would like to Grind. Controlled by time or level +
-  - **Fishing Marker:** When the bot is in Fishing mode you use this marker to set where you would like to fish. Controlled by time or level +
- +
-{{http://i.imgur.com/X5Pdro9.png?200}} +
- +
-**Other Settings:** +
- +
-  - **New Marker:** Use this to creat a new marker at your current location. +
-  - **Add to List:** Use this to add a marker to the list that has already been created.( You select these from the Marker Name Drop down Menu) +
-  - **Marker Name:** is a Drop Down Menu for all the markers on the current mesh for the current marker type. You can select Markers from this menu to add to the Marker list +
- +
-{{http://i.imgur.com/Y0MVZxu.png}} +
- +
-**Marker Settings:** +
- +
-  - **Name:** Name of your marker. +
-  - **Time(s):** Time spent at this marker in seconds.(set to 0 to be controled only by level) +
-  - **Min Level:** Min Level to start using this marker. +
-  - **Max Level:** Max Level to finish using this marker. +
-  - **ContentID=:** Example grind marker, if you put the mob ContentID here it will Fight only this mob(123;456;789) +
-  - **NOT ContentID=:** Example grind marker, if you put the mob ContentID here it will ignore this contentID. (123;456;789) +
-  - **Higher Priority:** To move the current Marker Higher in Priority in the list of markers. +
-  - **Lower Priority:** To move the current Marker Lower in Priority in the list of markers. +
-  - **Remove Marker:** Removes the current Marker from the list of markers.(will still show up in the Marker name dropdown menu) +
-  - **Delete Marker:** Deletes the current marker from the mesh and the list of Markers.(Complete deletion of the marker) +
-{{http://i.imgur.com/mbtpTFo.png?200}}\\ +
- +
-**Example:** +
-Here is an example of a Gathering Marker. As you can see the Gather Manager has been removed.  The priority of items that you wish to gather is now controled by the marker and Marker Manager.  Just like the Grind Marker above you have similar settings a couple new ones and a unique way to use some of the settings here are some examples.\\ +
-  - **ContentID=:** Example Gather Marker, if you put the ContentID here for the Tree nodes it will only Gather this type of node(Whitelist target will auto add the content ID for your target in to this field) +
-  - **NOT ContentID=:** Example Gather Marker, if you put the ContentID here for the Tree nodes it will ignore this type of node. +
- +
-However Added to the Gathering Markers are your priority list (also Stealth and Mooch will be found on the edit marker, gather Maps by type is also found here, along with Gathering Gardening materials, furhter more you can set skill profiles on a marker basis.\\ +
- +
-{{http://i.imgur.com/vHaA0F7.png?200}}\\ +
-{{http://i.imgur.com/JhFFrpx.png?200}}\\ +
-{{http://i.imgur.com/xXMu4mh.png?200}}\\ +
- +
-  - **Item Priority 1:** Is the item name you wish to gather above anything else.(example: Iron Ore   **NOT** iron ore) +
-  - **Item Priority 2:** Is the itm name you wish to gather if the first item is not present. +
- +
-{{http://i.imgur.com/3zATUBE.png?200}}\\ +
- +
-In this case here the marker is in the middle of 2 different types of botanist nodes.  I can set Priority 1 to be the item i want to gather from trees and the Priority 2 to be the item i wan tto gather from the bushes. +
-==== Navigation Mesh ==== +
- +
-A Navigation Mesh or short NavMesh defines the ground on which the bot can walk. It sits ontop of the level geometry like a second skin and is used for the calculations needed in order to move the bot freely around through the gameworld and to avoid obstacles etc.\\ +
- +
-{{http://www.mmominion.com/media/FFXIVMinion/tutorials/mesher2.jpg?200}}\\ +
- +
-A Navmesh is created from multiple Triangles as basis geometry. With the included MeshManager you are able to create and modify the triangles for the navmesh. After creating enough Triangles, you need to save them ( they will be saved inside the \Navigation\ folder as xxx.obj file). When you press the Save button (or when loading the first time a navmesh), the Real Navmesh will automatically build from the Triangles, this Navmesh is beeing used for the bot to navigate on.\\ +
- +
-{{http://www.mmominion.com/media/FFXIVMinion/tutorials/mesher1.jpg?200}}\\ +
-In order for the bot to move intelligently over the maps, avoid obstacles or dangerous areas, walk safely on roads without encountering enemies or even beeing able to jump down ledges or over obstacles, the NavMesh/Triangles can be recorded with different Area-Types, which you can see on the screenshot above.\\ +
-  - **Road:** Use this for safe roads or places that have no enemies around. +
-  - **Lowdanger:** This is the default areatype, use this for most of your parts. +
-  - **Highdanger:** Use this for places which for example have an enemy elite/boss where your bot will probably die when he is alone. +
-  - **OffMesh Connections:** These can be used for letting the bot know that he has to jump from A to B or jump down a ledge (but never try to go up that way). Read more on them below. +
- +
-**Create your own navmesh:** +
-  - Click on Advanced Settings.{{http://i.imgur.com/TCqd0yg.png?200}} +
-  - Click on MeshManager.{{http://i.imgur.com/alfIxg5.png?200}} +
-  - Click on the Editor Settings Tab{{http://i.imgur.com/qNyR9xU.png?200}} +
-  - If you have already a navmesh loaded for the zone you are in, press the Clear Navmesh button to make a fresh start. Next Click Show Triangles " and Enable "Nav Mesh". By default the Record mode areatype is set to Lowdanger. The Record Size is the radius around your player where it will place triangles automatically. Increase/Decrease this according to your needs. +
-  - Now start moving your character and it will automatically place the Triangles around your player. If you continue to record on an already existing mesh or at a different spot, you can force the placement of Triangles by holding down CTRL.  +
-{{http://i.imgur.com/K3d6Spd.png?200}}\\ +
- +
-  - **CTRL:** Force placement of Triangles, be careful in using that, it can produce unusable navmesh connections / triangles which will break the navigation of the bot if your character cant walk along these triangles! So use this only when there is no other way and make sure you cleanup / remove not walkable Triangles!!! +
-  - **Change Mesh, Change Type and Change Size:** can be used to change the AreaType of already placed Triangles around your player, or Delete mesh around your player if you set it to Delete. +
-  - **Add OffMeshConnection:** Press this button once where you want the bot to start his jump, then move your player where the bot should land, and press this button again. A new connection between these two points will now be shown. Use this to let the bot know where he can jump over or jump down. By default the bot will only jump from start to endpoint, if you want him to be able to jump into both directions, enable the "Bidirectional OffmeshConnection" checkbox, then record the Connection. +
-  - **Del OffMeshConnection:** Walk to either the Start or the End of an OffMeshConnection and press this button to remove the connection. Note: Each Navmesh can hold only a max of 255 connections! +
-  - When you are done creating enough Triangles, Stop the recording and press the **Save NavMesh** button in the MeshManager. The NavMesh will now be build from your Triangles. +
-  - Click the "Show Real Navmesh" checkbox to see the new navmesh. +
-  - Done! you have created your own navmesh and the bot can now start using it! +
-  - You can set your evac point by pressing the evac button. +
-==== Profile  ==== +
- +
-**Profile Manager for making Quest Profiles** +
- +
-After Pressing the Profile Manager button it will bring up a new UI  menu to create your Quest Profile. +
- +
-{{http://i.imgur.com/dGUIOly.png?200}}\\ +
-{{http://i.imgur.com/4QBZXoi.png?200}}\\ +
- +
-Here we will go over some of the options for the Profile Manager(PM)\\ +
-{{http://i.imgur.com/O0Lhzsz.png?200}}\\ +
- +
-  - **Profile Type:** Here you can set the type of profile you want to create either a Duty profile or a Quest Profile. +
-  - **Exisiting Profile:** Here you would select a profile that you have already started and wish to add on to the profile +
-  - **New Profile:** If you wish to make a new profile you would name it here and then click create profile button. +
- +
-Now that you have your Quest profile named lets get in to the options for the quest its self.\\ +
- +
-{{http://i.imgur.com/6tDaHLn.png?200}}\\ +
- +
-  - **Quest ID:** This is the ID for the current quest. You select the quest in your journal and click the Pull Quest ID button. +
-  - **Quest Job:**  If you have to be a specific class/job for the quest you select the class using the drop down menu. +
-  - **Quest Level:** Select the level that the quest can be completed at. +
- +
-After all these options are set you will click the "ADD Quest" button.  You now should see your Quest ID listed in the Quests section.  Now you will Click the quest to set the steps and options for that quest.\\ +
- +
-{{http://i.imgur.com/kjooivS.png?200}} +
- +
-Now we can edit the Pre Req quest(s) for current quest.\\ +
-{{http://i.imgur.com/eAVpkJR.png?200}}\\ +
-{{http://i.imgur.com/5WeSt8J.png?200}}\\ +
-  +
-  - **Edit Pre-Reqs:** If the quest requires a Previous quest to be done this is where you edit the Pre-Reqs for the current quest. +
-  - **PreReq Job:** Select the Class/Job that the PreReq quest requires you to be. +
-  - **PreReq Step:** This is to list the quests in order that are required to unlock a quest.  for example if 1 quest is needed to unlock the current quest you leave this at 1 and then list the prereq id. If you had 2 quest required to unlock the current quest you would Set the first prereq quest to 1 list the ID then the 2nd quest would be set to 2 and then list its ID.(**NOTE:**most cases this will be left at 1 because quests are done sequentially) +
-  - **PreReq ID:** This is the ID of the quest that must of been completed before picking up the new quest. +
-  - **Add Pre-Req:** adds all the pre-req info to the current quest. +
-  - **Clear all PreReqs:** clears all PreReq info you created. +
- +
-Now We can edit the steps for the current quest\\ +
- +
-**Edit Steps:** This is where you would Set the tasks for completing the quest.( Start quest, Kill counts, or item pick ups.) +
- +
-{{Http://i.imgur.com/b8AQq0i.png?200}}\\ +
-{{http://i.imgur.com/qwDLykR.png?200}}\\  -  +
-  - **Current Step:**  Quest profiles are broken down in to steps.  Each step of the quest will be assisgned a task, map id, mesh name, and NPC ID if it needs to interact with an NPC.  You can add Multiple steps per quest and list them in order. +
-  - **Step Task:** There are currently 5 different types of tasks and 1 custom task this is where you tell this step of the quest what it is going to perform. +
-  - **Start:** This is where you start the quest and the first step, You set the Map ID Mesh name you want to load the ID for the NPC quest giver and then click add step. +
-  - **Nav:** Setting a NaV steps instructs the bot to navigate to specific x,y,z cords ( this typically wont ever be used the bot knows how it needs to navigate to get from one map id to the next.) +
-  - **Interact:** Able to use this to interact with NPCs for quests or Objects for quets. Like say you have to untie some NPCs or you need to interact with items on the ground, you would use this task. Can add a dealy in (ms) before moving to the next item/npc for the cast time of the interact. +
-  - **Kill:** This task is used for kill count quests target the mob and add how many you are suppose to kill for the Kill count and then add step. +
-  - **Complete:** This task is used for turning in the quest once you have completed it. here you set hte map id mesh name and NPC ID that you need to turn the quest in to, also reward slot.  +
- +
-{{http://i.imgur.com/QFiJ078.png?200}}{{http://i.imgur.com/WnKVOuF.png?200}} +
- +
-At the bottom of the Step Manager you have edit Turn-ins. This is where you add the Id Number of the items and which slot the go into. So say you have to pick up 3 items from a quest to turn in to an NPC, This is where you set up  The ID+Slot in the turn in window to the NPC. +
- +
-  - **Add Step:** after you have chosen what type of step you want to do you click this button to add the step. +
-  - **Save Quest:** This saves all quest info to the current profile. +
-  - **Delete Quest:** This removes the current quest from the profile.[/spoiler] +
-  - **Save Profile:** Finaly once you have set up your profile and entered all the quests you click Save Profile to write the profile to a file. +
-==== Blacklist ====+
 {{http://i.imgur.com/Je7BxZx.png?200}}\\ {{http://i.imgur.com/Je7BxZx.png?200}}\\
  
-Alows you to Black list certain fates, mobs, aoes. You set the Blacklist name drop down menu to select the different things you want to black list. then you the add entry section to select  the exact mob or fate or aoe you wish to black list.  USe the Delete entry button to remove the item from the black list. +Alows you to Black list certain fates, mobs, aoes. You set the Blacklist name drop down menu to select the different things you want to black list. then you the add entry section to select  the exact mob or fate or aoe you wish to black list.  Use the Delete entry button to remove the item from the black list. 
-==== Multibot ==== +\\ 
-{{http://i.imgur.com/XRg2SGX.png?200}}\\ +\\
- +
-Works with the Multibot server, you can add specific bots to certain teams so that they can communicate with each other. this is a very advanced feature and requires Multibot server set up and one of 2 Lua Addons to make use of the connection. Basically the Multibot manager is just a tool to set up the connection in its self it does not perform any other tasks then communicating with the multibot server and joining specific groups.\\ +
- +
-Use this addon http://www.mmominion.com/Thread-Module-Controller-1-07  to control multiple bots from one bot. +
- +
-This is a small module I built to utilize the multibot server that is not used in FFXIV currently.  The initial release only does 3 things, but it is expandable, customizable, and allows users to add their own files in as well. +
- +
-The controller addon will allow users with the click of one button to accomplish things such as: +
-- Stop/Starting all bots. +
-- Reloading modules on all bots. +
-- Reconfiguring bot teams for duty without having to access your team mate's computer. +
-- Returning all bots to a certain location +
-- The list goes on.. any and all things that require inter-bot communication can be accomplished (generally speaking). +
- +
-**Installation** +
- +
-Module should be installed into the <Your Minion Directory>\LuaMods\Controller. +
- +
-**Top Level View:** +
-{{http://puu.sh/fpYIP/2386e54dd9.png?200}} +
- +
- +
-**Inner View:** +
-{{http://puu.sh/fpZ3l/881365255e.png?200}}\\ +
- +
- +
-**Custom Handlers (1 provided, all customs placed here):** +
-{{http://puu.sh/fpYVn/e005bb5c21.png?200}}\\ +
- +
-**Server Setup - Local ** +
- +
-To start, you will need the MultibotComServer application, which must be started, and settings.ini file configured however you'd like it to be (mostly you need to know/set the password in the [server] section). +
- +
-** Multibot Manager Setup** +
- +
-The multibot manager UI can most easily be found by going to the LuaMods in the top bar.  You will need to enter the IP address, port, password and channel.   +
- +
-Bots will only receive commands from bots in their channel, so make sure you join the correct channel.   The channel name should also be unique enough to avoid overlap with other teams if using a hosted/shared server.+
  
-=====Advanced Settings====+===== Advanced Settings =====  
 +\\ 
 +\\
 First things first you will want to click the Advanced Settings Tab.\\ First things first you will want to click the Advanced Settings Tab.\\
 {{http://i.imgur.com/HICW2lG.png?200}}\\ {{http://i.imgur.com/HICW2lG.png?200}}\\
Line 609: Line 432:
   * Click to Travel: Ctrl+click on map   * Click to Travel: Ctrl+click on map
   * Paranoid: New feature added, When enabled it will not Teleport if Characters are with in 30y.   * Paranoid: New feature added, When enabled it will not Teleport if Characters are with in 30y.
 +
 +{{https://i.imgur.com/58LfNaq.png?200}}\\
 +  * In order to setup a Keybind for "Move / Teleport to Position", you have to create a shortcut. You can then bring up the ffxiv Map and just click on it in order to move/teleport there.
  
 {{http://i.imgur.com/Nc9uzx0.png?200}}\\ {{http://i.imgur.com/Nc9uzx0.png?200}}\\
ffxiv-tutorials.1438126010.txt.gz · Last modified: 2015/07/28 23:26 by cichard