Differences

This shows you the differences between two versions of the page.

--- frenkey_followcommander [2021/01/05 13:58] – created frenkey
+++ frenkey_followcommander [2021/04/24 17:37] – frenkey
@@ Line 1: / Line 1: @@
-====== mmoalt_FollowCommander ======
+<WRAP important>
-<WRAP left round important 60%>
+Disabled.
-WvW is not officially supported. Can probably work together with the madao wvw addon.
 </WRAP>
-<WRAP left round important 60%>
-This addon is feature complete. And will probably not be updated again.
-</WRAP>
-\\
-<WRAP left important 60%>
-Please do exactly what it says in the **[[installation]]** guide.\\
-This addon is more demanding then normal botmodes and will trigger errors faster then Grind ever would.
-</WRAP>
-{{ :mmoalt_followcommander_64.png?direct&300|}}
-==== Follow any commander around the map! ====
-Features:
-  * Automatically selects the nearest commander as follow target
-  * Supports making a party member a "Commander"
-  * Supports making mentors a "Commander"
-  * Optimized for following commanders. Loooot!
-  * Leaves the commander if not enough people are following
-  * Leaves if the commander is not doing anything
-  * Leaves if the commander been off the mesh too long
-  * Uses waypoints
-  * Does Grindmode when no commander is found
-  * Train-, Chesttrain- and Roamingmode
-  * Enable/Disable combat
-  * Enable/Disable gathering
-  * Switches targets fast and prioritizes the commander target->champions
-  * Combat aggressiveness to tweak how often the bot should change targets.
-  * If enabled, logs spike damage and evades if the damage output is high enough
-  * Stacks on commander if asked
-  * Loots extra chests/bonus chests
-  * Uses guild banners
-===== How to use =====
-  * Go to a map with a commander
-  * Set your bot mode to "mmoalt_FollowCommander".
-  * Click the big fat play button
-===== Settings =====
-==== Info ====
-**Debug**: Show predicted location, current location and next location.\\
-**DebugLog**: Show various debug output.\\
-\\
-There is also a ton of debug information in the "Status" window.
-  * Click "Show status" in "Main menu"
-==== Combat ====
-Enable or disable combat\\
-**Agressiveness**: \\
-How fast do you want to change targets.\\
-And how many people need to be in combat before the bot starts killing stuff.
-  * Ultra
-  * High
-  * Optimal
-  * Low
-  * Lowest
-<WRAP left tip 30%>
-Higher values are more demanding.
-Do not use Ultra on classes with slow auto attack!
-</WRAP>
-==== Gathering ====
-Enable or disable gathering\\
-**GatherRange**: Max distance from the commander to do gather task.
-==== FollowType ====
-**FollowType**:
-  * Commander - Follows the nearest commander tag.
-  * Party - Follow a partymember
-  * Mentors - Follows the nearest mentor
-**PartyMember**: Select the party member to follow.\\
-**FollowMode**:
-  * Train
-    * Follow the commander and group at an optimal distance for tagging mobs
-  * Chest
-    * Follow the commander much closer. Mob targeting is less then for train mode
-  * Roam
-    * Follows the commander in a large circle.
-  * DynamicRoam (BETA)
-    * Switches between Roam and Train if the bot can see if the commander is doing an event.
-==== Roaming ====
-**MaxRoamDistance**: \\
-Maximum distance from the commander the bot is allowed to go.
-==== Player ====
-**Damagelogger**: Enable logging of damage dealt to you by mobs. Enables advanced evading.\\
-**HideInGroup**: When nothing is going on, the bot will select a random target near the commander and move there.\\
-**WaypointMode**:
-  * Accurate
-    * Uses pathing to find the nearest waypoint.
-    * More demanding
-  * Simple
-    * Uses 2D distance to find the nearest waypoint, might result in you porting to a waypoint far away in path distance.
-    * Less demanding
-  * None
-    * Don't use waypoints (except when dead)
-**NoCommanderMode**:\\
-Choose what the bot should do when no commander is around\\
-  * Grind
-  * Gather
-  * mmoalt_GatherMode (If you own it)
-==== Commander ====
-**MaxIdleTime**: Set the minimum time (in minutes) before this commander is considered not active.\\
-**MinFollowers**: Set the minimum number of followers to make this a proper commander.\\
-**AllowMentors**: Allow following mentors if there are no commanders on the map.\\
-**Blacklist current commander**: Manually blacklist the current commander.
-===== Recommended game/bot settings =====
-**Game**:\\
-Enable AoE Loot on interact\\
-Enable Autoloot\\
-Disable Double-Tap to Evade\\
-**Bot**:\\
-Disable Combat movement\\
-Enable Deposit items\\
-Set up a sell filter\\
-Buy salvage kits\\
-Set up a salvage filter\\
-===== Disclaimers =====
-<WRAP left important 60%>
-==== Mesh ====
-You still need a proper mesh for following.\\
-Having a proper mesh is your responsibility.
-\\
-If you don't want the bot to follow the commander in certain areas, you need to remove that area from a mesh yourself!
-</WRAP>
-<WRAP clear></WRAP>
-<WRAP left important 60%>
-==== Following a human around is always dangerous. ====
-I've added many failsafes in the addon, but due to human nature i can not always guarantee that a human will use bot logic.
-Therefore I can not take any responsibility for you getting banned for either botting too long or the bot doing unusual stuff.
-</WRAP>
-<WRAP clear></WRAP>
-\\
-\\
-Support:
-[[http://www.mmominion.com/thread-13268.html|Forum thread]]
-===== Public API =====
-''FollowCommanderAPI = {}''
-''FollowCommanderAPI.hasTarget = [boolean]'' \\
-True if currently following, false otherwise.\\
-''FollowCommanderAPI.targetID = [nil\number]'' \\
-Character id of the player you are following.\\
-''FollowCommanderAPI.settings = [table]'' \\
-Current FollowCommander settings\\
-''FollowCommanderAPI.dropDownSettings = [table]'' \\
-Values from the drop down list in the gui.\\
-''FollowCommanderAPI:Reload()''\\
-Reload all settings, set new random seed values and restart the botmode.\\
-''FollowCommanderAPI:ChangeSetting(key, value)''\\
-Change a FollowCommander setting. Valid keys are in FollowCommanderAPI.settings. Value has to be the same type as the old value.\\
-**Settings that have their own function can not be changed with this one.**\\
-''FollowCommanderAPI:BlacklistCurrentCommander()''\\
-Should be self explainatory.\\
-''FollowCommanderAPI:SetFollowType(type)''\\
-Valid types are in FollowCommanderAPI.dropDownSettings.FollowType.\\
-''FollowCommanderAPI:SetFollowMode(mode)''\\
-Valid modes are in FollowCommanderAPI.dropDownSettings.FollowMode.\\
-''FollowCommanderAPI:SetPartyMember(member)''\\
-Follow a new person when the FollowType is set to "PartyMember". Can be id or name. \\
-''FollowCommanderAPI:SetCombatAggressiveness(aggressiveness)''\\
-Valid types are in FollowCommanderAPI.dropDownSettings.CombatAggressiveness.\\
-''FollowCommanderAPI:SetWayPointUsage(usage)''\\
-Valid types are in FollowCommanderAPI.dropDownSettings.WayPointUsage.\\
-''FollowCommanderAPI:SetNoCommanderMode(mode)''\\
-Valid types are in FollowCommanderAPI.dropDownSettings.NoCommanderMode.\\
-**All functions that affect settings will call FollowCommanderAPI:Reload() automatically.**

User Tools

Site Tools

Differences

Page Tools