User Tools

Site Tools


frenkey_followcommander

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
frenkey_followcommander [2021/04/24 17:37] – frenkeyfrenkey_followcommander [2021/04/25 10:22] (current) – frenkey
Line 1: Line 1:
 +====== mmoalt_FollowCommander ======
 <WRAP important> <WRAP important>
-Disabled.+WvW is not officially supported. Can probably work together with the madao wvw addon. 
 </WRAP> </WRAP>
 +<WRAP important>
 +This addon is feature complete. And will probably not be updated again.
 +</WRAP>
 +\\
 +<WRAP important>
 +Please do exactly what it says in the **[[installation]]** guide.\\
 +This addon is more demanding then normal botmodes and will trigger errors faster then Grind ever would.
 +</WRAP>
 +
 +
 +{{ :mmoalt_followcommander_64.png?direct&300|}}
 +==== Follow any commander around the map! ====
 +
 +
 +
 +
 +
 +Features:
 +* Automatically selects the nearest commander as follow target
 +* Supports making a party member a "Commander"
 +* Supports making mentors a "Commander"
 +* Optimized for following commanders. Loooot!
 +* Leaves the commander if not enough people are following
 +* Leaves if the commander is not doing anything
 +* Leaves if the commander been off the mesh too long
 +* Uses waypoints
 +* Does Grindmode when no commander is found
 +* Train-, Chesttrain- and Roamingmode
 +* Enable/Disable combat
 +* Enable/Disable gathering
 +* Switches targets fast and prioritizes the commander target->champions
 +* Combat aggressiveness to tweak how often the bot should change targets.
 +* If enabled, logs spike damage and evades if the damage output is high enough
 +* Stacks on commander if asked
 +* Loots extra chests/bonus chests
 +* Uses guild banners
 +
 +===== How to use =====
 +* Go to a map with a commander
 +* Set your bot mode to "mmoalt_FollowCommander".
 +* Click the big fat play button
 +
 +===== Settings =====
 +
 +==== Info ====
 +**Debug**: Show predicted location, current location and next location.\\
 +**DebugLog**: Show various debug output.\\
 +\\
 +There is also a ton of debug information in the "Status" window.
 +* Click "Show status" in "Main menu"
 +
 +==== Combat ====
 +
 +Enable or disable combat\\
 +
 +
 +**Agressiveness**: \\
 +How fast do you want to change targets.\\
 +And how many people need to be in combat before the bot starts killing stuff.
 +* Ultra
 +* High
 +* Optimal
 +* Low
 +* Lowest
 +
 +<WRAP tip>
 +Higher values are more demanding.
 +Do not use Ultra on classes with slow auto attack!
 +</WRAP>
 +
 +==== Gathering ====
 +
 +
 +Enable or disable gathering\\
 +**GatherRange**: Max distance from the commander to do gather task.
 +
 +==== FollowType ====
 +**FollowType**:
 +* Commander - Follows the nearest commander tag.
 +* Party - Follow a partymember
 +* Mentors - Follows the nearest mentor
 +**PartyMember**: Select the party member to follow.\\
 +**FollowMode**:
 +* Train
 +* Follow the commander and group at an optimal distance for tagging mobs
 +* Chest
 +* Follow the commander much closer. Mob targeting is less then for train mode
 +* Roam
 +* Follows the commander in a large circle.
 +* DynamicRoam (BETA)
 +* Switches between Roam and Train if the bot can see if the commander is doing an event.
 +
 +==== Roaming ====
 +**MaxRoamDistance**: \\
 +Maximum distance from the commander the bot is allowed to go.
 +
 +==== Player ====
 +**Damagelogger**: Enable logging of damage dealt to you by mobs. Enables advanced evading.\\
 +**HideInGroup**: When nothing is going on, the bot will select a random target near the commander and move there.\\
 +**WaypointMode**:
 +* Accurate
 +* Uses pathing to find the nearest waypoint.
 +* More demanding
 +* Simple
 +* Uses 2D distance to find the nearest waypoint, might result in you porting to a waypoint far away in path distance.
 +* Less demanding
 +* None
 +* Don't use waypoints (except when dead)
 +**NoCommanderMode**:\\
 +Choose what the bot should do when no commander is around\\
 +* Grind
 +* Gather
 +* mmoalt_GatherMode (If you own it)
 +
 +==== Commander ====
 +**MaxIdleTime**: Set the minimum time (in minutes) before this commander is considered not active.\\
 +**MinFollowers**: Set the minimum number of followers to make this a proper commander.\\
 +**AllowMentors**: Allow following mentors if there are no commanders on the map.\\
 +**Blacklist current commander**: Manually blacklist the current commander.
 +
 +===== Recommended game/bot settings =====
 +**Game**:\\
 +Enable AoE Loot on interact\\
 +Enable Autoloot\\
 +Disable Double-Tap to Evade\\
 +
 +**Bot**:\\
 +Disable Combat movement\\
 +Enable Deposit items\\
 +Set up a sell filter\\
 +Buy salvage kits\\
 +Set up a salvage filter\\
 +
 +===== Disclaimers =====
 +
 +<WRAP important>
 +==== Mesh ====
 +You still need a proper mesh for following.\\
 +Having a proper mesh is your responsibility.
 +\\
 +If you don't want the bot to follow the commander in certain areas, you need to remove that area from a mesh yourself!
 +</WRAP>
 +<WRAP clear></WRAP>
 +
 +<WRAP important>
 +==== Following a human around is always dangerous. ====
 +
 +
 +I've added many failsafes in the addon, but due to human nature i can not always guarantee that a human will use bot logic.
 +Therefore I can not take any responsibility for you getting banned for either botting too long or the bot doing unusual stuff.
 +</WRAP>
 +<WRAP clear></WRAP>
 +\\
 +\\
 +Support:
 +[[http://www.mmominion.com/thread-13268.html|Forum thread]]
 +
 +
 +===== Public API =====
 +''FollowCommanderAPI = {}''
 +
 +''FollowCommanderAPI.hasTarget = [boolean]'' \\
 +True if currently following, false otherwise.\\
 +
 +''FollowCommanderAPI.targetID = [nil\number]'' \\
 +Character id of the player you are following.\\
 +
 +''FollowCommanderAPI.settings = [table]'' \\
 +Current FollowCommander settings\\
 +
 +''FollowCommanderAPI.dropDownSettings = [table]'' \\
 +Values from the drop down list in the gui.\\
 +
 +''FollowCommanderAPI:Reload()''\\
 +Reload all settings, set new random seed values and restart the botmode.\\
 +
 +''FollowCommanderAPI:ChangeSetting(key, value)''\\
 +Change a FollowCommander setting. Valid keys are in FollowCommanderAPI.settings. Value has to be the same type as the old value.\\
 +**Settings that have their own function can not be changed with this one.**\\
 +
 +''FollowCommanderAPI:BlacklistCurrentCommander()''\\
 +Should be self explainatory.\\
 +
 +''FollowCommanderAPI:SetFollowType(type)''\\
 +Valid types are in FollowCommanderAPI.dropDownSettings.FollowType.\\
 +
 +''FollowCommanderAPI:SetFollowMode(mode)''\\
 +Valid modes are in FollowCommanderAPI.dropDownSettings.FollowMode.\\
 +
 +''FollowCommanderAPI:SetPartyMember(member)''\\
 +Follow a new person when the FollowType is set to "PartyMember". Can be id or name. \\
 +
 +''FollowCommanderAPI:SetCombatAggressiveness(aggressiveness)''\\
 +Valid types are in FollowCommanderAPI.dropDownSettings.CombatAggressiveness.\\
 +
 +''FollowCommanderAPI:SetWayPointUsage(usage)''\\
 +Valid types are in FollowCommanderAPI.dropDownSettings.WayPointUsage.\\
 +
 +''FollowCommanderAPI:SetNoCommanderMode(mode)''\\
 +Valid types are in FollowCommanderAPI.dropDownSettings.NoCommanderMode.\\
 +
 +**All functions that affect settings will call FollowCommanderAPI:Reload() automatically.**
 +
frenkey_followcommander.1619285837.txt.gz · Last modified: 2021/04/24 17:37 by frenkey

Page Tools