Differences

This shows you the differences between two versions of the page.

--- gardening [2018/06/16 10:01] – husbandomax
+++ gardening [2018/06/16 11:27] (current) – husbandomax
@@ Line 1: / Line 1: @@
 ======== Gardening ========
+**This now supports all Clients and Languages + Inside houses with loads on new tools and features!!!**\\
 This Addon will automatically Plant, Water, Fertilize, Harvest and Remove crops fully automating gardening after each patch is setup.\\
-{{http://i.imgur.com/3DTIxAq.png}}
+{{https://i.imgur.com/8iocroZ.png}}
 ===== How to use: =====
-Make sure you record a mesh for you housing ward/inside you house. Full guide below.
+Make sure you record a mesh for you housing ward/inside you house. Full guide below.\\
 === Adding A Garden Patch ===
+{{https://i.imgur.com/geEFbfH.png}}\\
+  NOTE. Adding Patches is much easier now...
+. Hit the "Add Garden Patch" button on the main addon window (Button is found under the "Patches" list.
+. Walk up to the patch you would like to add.
+  NOTE. Patches will get a RED box around them while the one you're selecting (Closest one to you) will have a GREEN box.
+. Enter a Name for the patch (Unique and not blank).
+. Set you Teleport Loation
+  NOTE. You can test these locations under the Transport > Teleport list in the main window to ensure the correct one.
+  NOTE. This needs to be set PER CHARACTER as each one is different. (This is done VIA editing the patch, guide will be below)
+. If Patch is a FLOWERPOT set the Travel data so it know how to enter the house.
+  NOTE. These locations are made in Transports > Travel Points > Add Travel Point. (Guide Below)
+. Set other reaming settings to your preference.
+. Select Soil,Seed and if required for flowerpots if you'd like to colour and what colour.
+. Press the Save Patch button!!
-  - Select the patch size (Small,Medium,Large)
+=== Editing A Garden Patch ===
-  - Enter a Name for the patch.
+{{https://i.imgur.com/0GasIC2.png}}\\
-  - Target the bed.
+. Hit the Edit button (Pencil Icon) on the main addon window (Button is found under the "Patches" list for the Patch you would like to edit.
-  - Select the soil to be used on the bed.
+. That's it now you can change anything you like!
-  - Select the seed to be used on the bed.
+. Don't forget to press that Save Patch button!!
-  - Press the Set button.
-  - Repeat for all Beds in Patch.
-  - Press the Save Patch button.
-=== Adding A Flower Pot ===
+=== Updating A Garden Patch POS/ID's ===
+{{https://i.imgur.com/sgEys6Q.png}}\\
-  - Select the patch size (Flower Pot)
+  NOTE. This is for manual updating, or changing the POS of the patch. ID's should be automatically updated now!
-  - Enter a Name for the patch.
+  NOTE. As you may have known from previous version... Almost every game update SE changes the ID's in housing wards.
-  - Target the bed.
+  NOTE. This required editing of the ID's This is a tool you can use to easily update the POS and ID's in gmae updates OR if you move your gardens.
-  - Select the soil to be used on the bed.
+  NOTE. The OLD Garden location will be show with a BLUE box while the One to update with will be GREEN.
-  - Select the seed to be used on the bed.
+. Hit the Update button (Refresh icon) on the patch you want to update.
-  - Check the Checkbox to enable colouring (Pomace)
+. Move to the path you would like to update with.
-  - Select the end colour result
+. Hit the Update ID's OR Update POS depends what you would like to do.
-  - Press the Set button.
-  - Press the Save Patch button.
 === Adding An AFK Location ===
-**Please Note that these locations are set per Map ID so you can have a different location for inside your house and outside. \\
+{{https://i.imgur.com/5grYQ39.png}}\\
-All wards/subdivisions of the same zone will have the same Map ID also Each house type will have the same Map ID (Small,Med,Large)**
+  NOTE. AFK locations will only be used if you're outside in a housing ward and are set per map and division.
-  - Move to the position you'd like to AFK at.
+  NOTE. This list is saved per settings file of the bot.
-  - Press the Set AFK Location button
+  NOTE. (Works great with retainers addon if you put it near a bell outside, inside AFK will work for retainers automatically)
+. Move to the position you'd like to AFK at.
+. Press the Set AFK POS button
+. Enable if wanted.
-=== Adding A Vendor Location ===
+=== Viewing Patch Details ===
-**Please Note that these locations are set per Map ID so you can have a different location for inside your house and outside. \\
+{{https://i.imgur.com/6XJo5CV.png}}\\
-All wards/subdivisions of the same zone will have the same Map ID also Each house type will have the same Map ID (Small,Med,Large)**
+  NOTE. You can use this to look at ant details and times of the Patch.
-  - Move infront of the "Material Supplier" in the ward.
+. Click the button that contains the Patch name in the patch list.
-  - Press the Set Vendor Location button
+. Click the Bed button for the Bed you'd like to see the info about.
+. Well that's it...
+=== Adding A Travel Point ===
+{{https://i.imgur.com/w04trJh.png}}\\
+. Click the "Add Travel Point" button found under Transports > Travel Points in the main window.
+. Enter a UNIQUE name.
+. Target the House Entry.
+. Hit the "Set Target Data" button.
+. Target the House Exit.
+. Hit the "Set Target Data" button.
+. You should now have data for both the Entry AND Exit with no "Invalid Data" message.
+. Click "Save Transport"
+=== Adding A Travel Point ===
+=== Checking Teleport Points ===
+. Teleports are found under Transports > Teleports in the main window.
+. Click the button for the one you'd like to test. (Usually only need to do this if you have multiple Private/Shared houses in the same area)
+=== Vendor Locations ===
+  NOTE. As of the rewrite all this info is automatically applied and just has a simple "But Fertilizer" toggle.
+=== Add/Edit Patch Options ===
+  NOTE. General Guide for what each option does.
+. Teleport - (MUST be set so the addon knows where to go.)
+. Travel - (MUST be set if using a Flowerpot Inside so the addon know where the correct door is.)
+. Water - (Allows the addon to water this Patch)
+. Water Time - (How often to water, In Hours.)
+. Fertilize - (Allow the addon to Fertilize this Patch)
+. Fertilize Time - (How often to Fertilize, In Hours.)
+. Harvest - (Allow the addon to Harvest this Patch)
+. Plant - (Allow the addon to Plant this Patch)
+. Replant First Seed - (This is for use with Crossbreeding. Will Plant all the seeds then remove and replant the first one for optimal crossbreeding.)
+. Filter Soil/Seeds - (Only show the items you have in your inventory.)
+. Soil List - (What Soil to use while planting in X Bed.)
+. Seed List - (What Seed to use while planting in X Bed.)
+. Seed Search (Magnifying Glass icon) - (Opens a Search tool to easily find a certain seed to ally to SELECTED or ALL Beds.)
+=== Soil Search Tool ===
+{{https://i.imgur.com/uoo4jnh.png}}\\
+  NOTE. This Search supports all languages.
+. Click the Search tool in the Add/Edit Patch tool.
+. Type the Item Name. (In your current Client Language)
+. Apply to Selected Patch OR ALL Patches.
+=== Adding Other Characters Teleports ===
+  NOTE. This Needs to be done on each character that you would like to add into an existing patch. (So the teleport to the correct location)
+. Simply edit the patch you would like to add a location to.
+  NOTE. Hit the Edit button (Pencil Icon) on the main addon window (Button is found under the "Patches" list for the Patch you would like to edit.
+. Select the correct Teleport on the drop list to match the current character.
+. Hit Save. You've now added new teleport data for that specific character!
 ===== Videos =====
-=== Preview ===
+=== Preview (Outdated Currently) ===
 {{youtube>-Ns7cgcbA5g?large}}
-=== Adding A Garden Patch ===
+=== Adding A Garden Patch (Outdated Currently) ===
 {{youtube>qp0j6wjLGqU?large}}

User Tools

Site Tools

Differences

Page Tools