User Tools

Site Tools



gardening

This is an old revision of the document!


Gardening

This Addon will automatically Plant, Water, Fertilize, Harvest and Remove crops fully automating gardening after each patch is setup.

How to use:

Make sure you record a mesh for you housing ward/inside you house. Full guide below.

Adding A Garden Patch

  1. Select the patch size (Small,Medium,Large)
  2. Enter a Name for the patch.
  3. Target the bed.
  4. Select the soil to be used on the bed.
  5. Select the seed to be used on the bed.
  6. Press the Set button.
  7. Repeat for all Beds in Patch.
  8. Press the Save Patch button.

Adding A Flower Pot

  1. Select the patch size (Flower Pot)
  2. Enter a Name for the patch.
  3. Target the bed.
  4. Select the soil to be used on the bed.
  5. Select the seed to be used on the bed.
  6. Check the Checkbox to enable colouring (Pomace)
  7. Select the end colour result
  8. Press the Set button.
  9. Press the Save Patch button.

Adding An AFK Location

Please Note that these locations are set per Map ID so you can have a different location for inside your house and outside.
All wards/subdivisions of the same zone will have the same Map ID also Each house type will have the same Map ID (Small,Med,Large)

  1. Move to the position you'd like to AFK at.
  2. Press the Set AFK Location button

Adding A Vendor Location

Please Note that these locations are set per Map ID so you can have a different location for inside your house and outside.
All wards/subdivisions of the same zone will have the same Map ID also Each house type will have the same Map ID (Small,Med,Large)

  1. Move infront of the “Material Supplier” in the ward.
  2. Press the Set Vendor Location button

Videos

Preview

Adding A Garden Patch

Recording Navmesh

It's easier to pickup you garden beds and record the mesh as normal if possible.
If not then record part of the area by reducing the range and move the garden beds and record the normal floor where they were.
Then continue to mesh as much of your area as you like. If you want to auto buy fishmeal from vendor make sure to mesh a path to it.

Recording Navmesh (Lazy way)

This method is easier but will ignore all outside items. Make sure to clear a path if you don't want to have run at the item until it breaches through.

Support

For support or anything related to this addon please post in the forum > http://www.mmominion.com/thread-18167.html

gardening.1529143292.txt.gz · Last modified: 2018/06/16 10:01 by husbandomax